Updated at: 13-05-2022 - By: Sienna Lewis

The binding is one of the final steps in constructing a quilt. I know that after a long period of time spent working on a quilt, I am eager to get it finished. It’s so easy to rush through a task just to get it over with. However, after spending so much time and effort on a quilt, it’s critical to ensure that the final product is beautiful on its own.

Mitered corners are one approach to get a beautiful binding.

A mitered corner is something you may not be familiar with. Think of it as a sort of envelope closure for the corners of the document. Here are a few real-life instances to illustrate my point.

Simple Steps On How To Sew Corners On A Blanket

We’ll try to concentrate on the simpler methods of securing the corner of your blanket. People who wish to get the job done quickly can also use these approaches.

Stitching will be our method of choice in this instance.

In order to use this technique, you must have no prior knowledge of sewing in order to sew directly on your blanket. A needle, thread, and scissors are all you’ll need to get started.

Method 1 – self-turned mitered corner

In this method the fabric edges are turned to the back of the fabric ( or the front for a border like effect). Napkins, blankets, bedspreads, and other household linens’ edges are most often finished in this way. Having no bulk in the corners of the hem makes it appear great.

How to sew this mitered corner

Make sure the fabric’s edges are perfectly straight before cutting them. Be sure that all four sides of blankets and napkins and the like are trimmed perfectly straight. A straight edge can be achieved by ripping cotton materials. You can also get a straight edge by using the transparent square scale.

Turn the fabric’s edges by half an inch to the back. Press down firmly.

Turn the cloth edges a second time to the same width as the initial turn. After making two folds on each edge, you’re done. The fold should be pressed using the tips of your fingers. Make a chalk mark on the inside of the second fold.

Open the first fold of the paper ( the second one).

You’ve already made a black corner, so bring it up to meet it.

Nicely creased. You’ll be stitching through this line later, so you’ll need to be able to see it clearly.

In order to make the corner pointy, fold the fabric so that the line you drew before is on both sides. Stitch along the marked line ( red line in the picture below). With back stitching, you can begin and terminate the stitch in either direction.

The additional seam allowance should be trimmed and the seam opened.

Turn the edge inside out, as shown in the illustration below, to complete the transformation. This mitered fold can be secured to the edge with a top stitch.

Method 2 – Mitered corner with a fold

You don’t need to cut anything to get the same mitered effect. Finishing the fabric’s edges with a zig zag or rolled hem is always a good idea first. Draw a line 1/2 inch in from the edges on the inside. Then, following the corner mark, turn the corner inside out. Then fold the other folded sides inwards as well.. The corner will be mitered. The folded fabric should be stitched in place.

Method 3 – Mitered corner with bias tape

The two options are as follows:

Method 1

In the post on making a pieced blanket, you can see this process in action.

Method 2

This involves a few simple stitches and a few finger maneuvers.

After folding the fabric strip in half, you must first turn the side edges to the inside 1/4 inches and then fold it in half again.

As a result, one side of the fabric strip (about 1/8 inch wide) is folded in the middle.

Proper binding and stitching will be achieved by using this projecting technique.

The binding should be stitched in place until the very end.

Fold the binding strip as shown in the picture when you reach the corner.

The fabric edge should meet the centerfold of the fabric strip on the inside of the garment. If the alignment isn’t right, fix it.

Create a mitered corner by folding the fabric binding strip in half.

Make a stitched-in corner.

You may learn more about bias tape and binding with bias tape by reading the post on producing bias tape.

Method 4 – Mitered corner with a Border

For a shawl, this technique is perfect for making a border out of fabric that is a different color or pattern from the main fabric. After stitching the mitered corner border, you will still need to finish the raw fabric edges.

For this method, you will need two strips of fabric (one for each corner) that are 1 inch wide and 2 inches long.

Keep the midpoint of the fabric strip aligned with the middle of the fabric edge.

Sew the edging of the bag together. You must leave a 1/4-inch gap on both sides of the fabric edge before sewing.

Now, as seen in the illustration below, bend one short edge downwards.

Keep the second strip of fabric on the next fabric’s edge as a guide. Stitch down the edge, leaving a quarter-inch gap on either side. There’s already a cozy spot for you there. For your border strips, you’ll now need to get a mitered corner.

Fold the fabric diagonally. Fold along a scale and you’ll notice that the cloth strips are overlapping each other. Make a mark on the fabric strip where the scale hits it ( red mark in the picture below)

Fold the fabric in half, then in half again. Fabric strips are overlapping each other when the fold is made at an inch-by-inch scale. The point where the scale meets the cloth strip should be marked ( red mark in the picture below)

Remove any extra seam allowance by snipping it. With a mitered corner like the one seen below, you’ll have a gorgeous border.

When using this method, you must either face or line your entire border or piece of fabric, as the back of the piece will show the corner stitches.

In addition, there is a procedure that finishes the edge and adds a gorgeous border at the same time. The corner is beautifully stitched with border, despite the fact that it is not mitered.

How many inches do you cut for a tie blanket?

Step-by-step instructions for tying a fleece blanket On both sides, remove the rough selvage edge. Just a few inches on either side is usually all that is necessary.

What is a good size for a tie blanket?

Each fleece can be purchased in quantities ranging from 1. 5 to 3 yards (1.3-2.7 meters). Throws can be made from 1.5 yards, and twin-sized blankets can be made from 2.5-3 yards (2.3-2.7 meters). Disperse the contents of the bag.

What kind of stitch should I use on fleece?

To stitch most fleece fabrics with a sewing machine, use a size 12(80) Universal needle. Make a long stitch with the machine (8 to 10 stitches per inch). The ideal stitch to use is a narrow zigzag or straight stitch. If at all feasible, reduce the pressure on the presser foot.

How much fabric do I need for a full size tie blanket?

You’ll need one yard of each material to make a baby blanket (so, 2 total yards). One-and-a-half yards is ideal for a child’s blanket (a total of 3 yards). It will need 2 yards to make a blanket large enough for an adult (4 total yards).

How big is a no sew blanket?

How to build a No-Sew Fleece Blanket: Step by step instructions. Fleece is 60 inches wide, thus a 60 by 60-inch blanket is ideal (or longer). This means that the final product will be roughly 10 inches smaller than the fabric you started with.

How much fabric do I need to make a tie?

One tie will require a minimum of 1 12 yards (1.4 meters) of front fabric and 5 x 6 inches of rear liner cloth. Tie liners made of silk are a popular choice. Printed cotton, linen, or denim provide excellent choices for a business-casual tie.

How much fleece do I need for a large tie blanket?

You’ll need two complementing pieces of fleece to build a fleece tie blanket (baby: 1 yard of each color, kid: 1.5 yards of each color, adult: 2 yards of each color) October 23, 2018.

Conclusion

When it comes to sewing blanket corners, some people think it is superfluous, but it is essential since sewed blanket corners are both beautiful and long-lasting.

In addition to enhancing the aesthetic appeal of your blanket, they also serve to prevent tearing and fraying at the blanket’s edges.

Your blankets’ integrity is protected by the corner stitch. Curling or rolling is also prevented by using this method. Using this part can extend the life of your item.