Updated at: 18-04-2022 - By: Sienna Lewis

According to the official manual for the Consew sewing machine, this page provides instructions for how to thread the machine. Tutorials for setting up your Consew model in preparation for sewing are also available.

Not only does this include threading the needle, but it also includes prepping the bobbin. We’ll even write a product review for the company.

Because the Consew is a well-known industrial sewing machine, you may want to learn more about threading a Consew. Ultimately, any sewing machine can only work as expected if it is set up correctly.

How To Thread A Consew Sewing Machine According To Manual

  1. Strive to achieve the highest possible standard of performance.
  2. The first thread guide on the top of the sewing machine arm is placed to the left and right of the stand.
  3. To get to the tension discs, thread the needle through the other holes.
  4. Between the discs, down right to left, and around the thread controller, the thread should be wrapped.
  5. The thread should be steered up the thread controller and against the check spring.
  6. Have the thread through the thread guide and up the take-up lever
  7. Have the thread through the thread guide and up the take-up lever
  8. thread guide and then pull it through the take-up lever

Use the Consew manual’s image to find the thread guides and thread them in the correct order.

Consew 206RB - How to thread the machine - YouTube

What thread to use on a Consew sewing machine

Even silk threads can be used on the Consew sewing machine. The machine can handle threads up to #8 in thickness, but be sure to check the needle and bobbin for the specific thread type you’re using.

Left twist thread is only suitable for threading needles, but either right or left twist is acceptable for threading the bobbin. Finally, when using your twin-needle Consew sewing machine, make sure you stitch with the right twist thread on the left needle.

How to change the needle on the Consew sewing machine

  1. If you’re using a sewing machine, you’ll need to know how to insert a needle.
  2. Strive to achieve the highest possible standard of performance.
  3. The needle set screw can be loosened.
  4. The long groove on the needle should be pointed to the left as you insert it into the bar as far as you possibly can.
  5. To complete, tighten the needle set screw.
  6. When removing the present needle from the Consew sewing machine, follow the same procedure.

How Do You Put A Bobbin In A Consew Sewing Machine?

  1. Push the slide plate open to remove the bobbin.
  2. To remove the bobbin, simply lift the case clasp up.
  3. Insert the bobbin by holding it in the centre of the bobbin casing and inserting it into the machine.
  4. To keep the bobbin in place, press the clasp all the way down.
  5. Before inserting the thread, ensure that the bobbin can be wound from the left to the right.
  6. Have a thread running between the bobbin case opener and the projection.
  7. Using the needle plate, draw the thread beneath the tension spring and down a couple of inches.
  8. Close the plate that slides up and down.

How to wind the bobbin of a Consew sewing machine

  1. The bobbin winder spindle on the machine should receive the bobbin as far as possible.
  2. Use a tension bracket and tension disc to route the stand’s thread through the tension bracket.
  3. Wind the thread in the opposite direction of the bobbin multiple times in the opposite direction.
  4. Engage the winding mechanism by pressing the bobbin winder lever all the way down.
  5. As soon as the bobbin is full, begin winding and then release the wheel.
  6. Remove the bobbin from the winder spindle and cut the thread.
  7. Simply loosen the tension bracket screw if you observe that the thread is not uniformly coiled.
  8. Adjust the bracket and retighten the screw to its original position.

How to regulate the thread tension on your Consew sewing machine

  1. You can increase or reduce the needle thread tension by rotating the serrated nut clockwise or counterclockwise.
  2. Turn the tension screw to increase or reduce the bobbin’s thread tension by locating it and twisting it in that direction.

Is Consew A Good Brand?

If you need a heavy-duty sewing machine for industrial application, look no further than Consew. Since its founding in 1898, the company has expanded its product line to include cutting and pressing equipment.

Consew 206RB-5 Industrial Sewing Machine Review

They also claim to have machines capable of sewing everything from clothing to mattresses, saddles and even sails. Consew maintains offices in Los Angeles, Miami, and New Jersey, among other locales.

What Kind Of Thread Do You Use For An Industrial Sewing Machine?

Nylon thread is the most widely used and most dependable type of industrial sewing thread. It’s strong enough to cut through hefty materials and won’t break down over time.

If you’re interested in learning more about heavy-duty threads, check out this article on the strongest sewing thread.

How to Troubleshoot a Consew Sewing Machine

Consew isn’t as well-known as other sewing machine brands, but it does produce sewing machines and quilting machines. These machines have several advantages, including a safety clutch, the capacity to sew well on both lightweight and heavy materials, and the ability to change the bobbin without removing the machine from the machine. When the machine has troubles, the most common causes are incorrect threading or lack of lubrication to moving parts.

Things You’ll Need:

  • the lubricant used in sewing machines
  • Screwdriver

Make sure the machine has enough oil in the places where it’s needed. The machine has a lot of places where it needs to be oiled. This can lead to complications such as thread breaking regularly and even discoloring the cloth when there is not enough lubrication at any time. Check your owner’s manual to be sure you’ve lubricated all of the appropriate parts.

To ensure that your stitches are the correct length, measure each one. Incorrect timing, poor tension, or an incorrectly wound bobbin can all cause uneven stitches. It’s important to make sure the bobbin is evenly wound. To get a uniformly wound bobbin, adjust the bobbin’s tension bracket. The upper thread should be checked to ensure it is taut and that it has been threaded through all relevant points before installation.

It is important to maintain an equal tension on both the upper and lower threads. Stitching will be excellent as a result. Adjust the upper thread tension by turning the serrated nut on the tension device and the lower thread tension by turning the big screw on the outside of the bobbin case. The thread tension increases when you turn to the right, while the thread tension decreases when you turn to the left.

Adjust the fabric speed if the cloth is clinging to itself. Using a screwdriver, turn the screw on the machine’s back. Use a diagram of your machine from the user’s handbook to locate the screw, which is small and directly in the middle of the arm. Depending on the model, the placement may shift a little.

The machine should be inspected for bent or damaged components. Parts that are worn or damaged will need to be replaced since they can mess with the timing, tension, or even break the thread.

Consew Sewing Machine Reviews

Here are our thoughts on the Consew sewing machines that we’ve tried out thus far.

1. Consew 206RB-5 Walking Foot Industrial Sewing Machine

Among sewing machines, the Consew 206RB-5 is among the most trustworthy. When dealing with leather or upholstery, it’s ideal because of the high presser foot lift and powerful motor it has. Uniform when utilizing heavy-duty materials like leather and denim, the walking foot mechanism ensures even feeding of material.

  • Compound feed for walking feet (triple feed)
  • Presser foot lift
  • A servo motor and a table are supplied.

Threading Industrial Sewing Machine the Right Way Consew 226 Walking Foot - YouTube

2. Consew CP206R Portable Walking Foot Machine

Portable but powerful, the Consew CP206R model is capable of handling heavy-duty materials and projects. Upholstery, awnings, and leather clothing can all benefit from the walking foot and drop feed, which were developed specifically for these applications. The portability of this machine makes it a breeze to use.

  • Hook with a single needle that oscillates horizontally.
  • Foot pedal with deluxe features
  • Feed with your foot as you walk.

3. Consew CP206RL Portable Walking Foot Machine

It is possible to sew a wide range of fabrics with the Consew CP206RL model, from thin to thick. You can get into hard-to-reach places like cuffs and seams with its extended arm. However, this machine has a powerful motor, making it easy to move around.

  • a new design with a longer arm
  • Thread take-up lever in the form of a link
  • Portable

4. Consew 75T Portable Blindstitch

A variety of materials can be sewn together using the Consew 75T, and the machine is designed to deliver professional results quickly. In addition to hems and pant cuffs, it can also be used for home decor tasks like curtains and other textiles. A wide range of materials, including wool, knit, and synthetic, can be worked with this method.

  • Stitching rates of up to 1,000 per minute have been achieved.
  • Control of knee lift
  • The cylinder arm

Consew Sewing Machine Buyer’s Guide

Sewers looking for a more robust machine will find it in the Consew series of sewing machines. Portable machines are available at lower price points, but industrial-level machines from Consew are available with their own sewing table. Using these machines, you can work with heavier materials like upholstery and even leather, thanks to their powerful motors. In addition, Consew machines have powerful motors that enable for quick stitching with smooth, professional results.

The presser foot and feed dogs on most Consew machines both have a walking foot, which makes it possible to feed numerous layers of fabric or heavy-duty fabrics uniformly. In order to execute quilting crafts, such as basting and applique, or to manufacture clothes from denim or leather, this feature is essential for sewers. Extending sewing tables or big work areas on Consew machines make it easier to sew large-scale projects.

In the case of thick materials, Consew machines are a perfect choice for sewers. Customers claim that the more powerful Consew machines can stitch leather outfits. To locate a machine with various preprogrammed features and personalized stitches is not possible with Consew machines, which are mechanical. They will discover a selection of high-quality sewing machines in a variety of pricing ranges, suitable for both newcomers and more seasoned sewers. To get professional results on any project or material, these machines include a variety of built-in stitches. These machines were created with the goal of producing high-quality home decor and clothing, and they have the qualities necessary to do so.

Consew 256R-1 What is it? - Leather Sewing Machines - Leatherworker.net


That’s all there is to it! Using a Consew sewing machine is a simple matter of following the instructions provided in the instruction booklet.

As with other sewing machines, the process of threading the bobbin on a Consew machine is very similar. If you have any further questions, please don’t hesitate to contact us.