Updated at: 14-05-2022 - By: Sienna Lewis

Any decor scheme can benefit from a rod pocket curtain, which is a true style chameleon. There are a wide variety of fabrics to choose from for the curtains: sheer, drapery, or even fashion fabric, all in a variety of colors and designs. They can be custom-made to fit a wide range of windows. It can be used as an under-curtain to provide privacy and heat control, or it can be used on its own.

That being said, why not create your own?

Affordability is a major factor in its popularity. You’ll not only have fun making one, but you’ll also learn a thing or two.

There are many of resources online that can help you create your curtain, so look no further.

Rod pocket curtains are a great way to get started with curtain construction. So, what are you waiting for? Let’s get started now, please.

Get Reary

The first step is to choose your fabric. Fabric should be at least two inches wider than your window to ensure a level curtain panel. In order to have a curtain panel that is ruffled, the width of your window must be doubled (this may require you to make more than one panel).

You need to decide which curtain rod you’ll use to hang the curtain, then. Your fabric should be 8-10 inches longer than the final curtain length if using a narrow rod. If you’re using a thick rod, your fabric should be 10 to 12 inches longer than the ultimate curtain length you wish. Never cut too short—once you’ve cut the cloth, there’s no way to go back and add more! Always aim for a greater length.

Before beginning to sew, wash, dry, and iron your cloth unless it can only be dry cleaned. For the curtains, you will need a sewing machine with a needle and thread as well as an iron and ironing board.

Steps To Sew Rod Pocket Curtains

Step 1

Measure the length of the curtain rod. Add a half-inch to the measurement to account for the rod pocket’s depth.

Step 2

The manufacturer’s instructions should be followed while installing the curtain rod at the desired location on the window or wall.

Step 3

The curtain body length is determined by measuring the distance between the bottom edge of the curtain rod and the desired curtain length. In addition to the length, add 6 inches for a hem allowance, 2 inches for a top ruffle allowance, twice the rod pocket depth, and a half inch. The sum is equal to the fabric’s cut length. Adding 30 inches to a curtain body length of 30 inches and a rod circumference of 4 inches yields a total of 43 1/2 inches. (The diameter of a 4-foot rod is divided in half to arrive at a 2-foot length.) The rod pocket depth is increased by half an inch. This measurement is multiplied by two to get 5.)

Step 4

Take the length of the curtain rod and multiply it by 2.5. Divide this number in half and then add 8 inches to get the total width of your two-panel treatment’s curtain panels. For example, if your curtain rod is 80 inches wide, you’ll need to multiply 80 by 2.5 to get 200, reduce that by 2 to get 100, and then add 8 more to get 108 inches per panel.

Step 5

The fabric should be cut to the desired length and width. Whenever you need to, join different widths of fabric together.

Step 6

Turn the bottom hem up 3 inches on one panel and lay it on the work surface with the wrong side facing up. Make a fold. Press the fold for an additional three inches after you’ve turned it. Close to the second turn of the hem, sew the bottom hem. Turn each side edge by 2 inches and press; then turn again and press. Repeat. Closely sew the side hems to the second fold.

Step 7

Press the top edge by half an inch. Turn over and look at the sum of the rod pocket depth and half of the top ruffle allowance for the sleeve. Turn the top edge 3 1/2 inches to the right and press the fold. When it comes to ruffle allowance, you’ll need a rod pocket depth of 2 1/2 inches and a half-inch allowance. Fold the hem and sew the folded edge.

Step 8

When sewing the rod pocket on the right side of the curtain, mark the bottom of the ruffle line at 1 inch from the top folded edge. Sew along this line all the way through the curtain’s various layers.

Step 9

The curtain should be cooled completely before being hung on the pole after being pressed.

Additional Tips

If you choose, you may also add a header to your curtain. It will appear to have a higher ceiling.

Your ceiling may appear higher if you have a lengthy curtain.

Ensure that the rod is at least a foot away from the window frame to avoid looking cluttered.

You can easily add an extra fold to the hems if the curtain appears longer than desired.

It can be used to alter the length of the curtain.

How high should you hang curtains?

Install your curtain rod in accordance with the rule of thumb (from Architectural Digest) that says drapes should be hung four to six inches above the window frame. You may make a window appear taller by hanging the curtain rod at eye level.

What does rod pocket curtains mean?

There are many ways to hang curtains; the most typical is the rod pocket, a sewn-in casement that slides over a curtain rod to conceal it.

How do you hang rod pocket curtains on a traverse rod?

Using a Traverse Rod, How to Hang Non-Pinch-Pleated Drapes Check for heading tape by turning the curtain panel inside out. The distance from the wall to the front of the carrier can be measured on the traverse rod. Insert a straight pin perpendicular to the top border and evenly spaced throughout the panel to indicate pin placement marks at the top of the back of the draperies.

Can you hang rod pocket curtains with rings?

In order to hang light or medium-weight curtains, you need special curtain rings with clips attached. It is possible to hang a curtain using hooks or curtain ring clips in the pole pocket.

How do you hang rod pocket curtains on a traverse rod?

Using a Traverse Rod, How to Hang Non-Pinch-Pleated Drapes Check for heading tape by turning the curtain panel inside out. The distance from the wall to the front of the carrier can be measured on the traverse rod. Insert a straight pin perpendicular to the top border and evenly spaced throughout the panel to indicate pin placement marks at the top of the back of the draperies.

What is the size of a standard curtain rod?

Traditional. Traditionally, the curtain rod extends from the window 6 inches above the top and 3 inches on either side. The bottom of the window sill will be 3 inches below the curtain’s hem. There are a few advantages to going for this style.

How do rod pocket curtains work?

This type of drapery can be referred to as a pole top curtain or a casement curtain and is a time-honored method of hanging drapery. On top of the curtain panel, there is a little casing that permits the rod to slip through. Panels are gathered on the rod to give them a gentle, clean appearance.

What are curtains with hooks called?

Standard heading for curtains and valances is Pencil Pleat or 3″ Tape Curtains. A pencil pleat curtain heading often has three rows of string threaded through it to accommodate three hook places on any track or pole.

Our Rod Pockets Necessary In A Curtain?

Yes, it is correct. Imagine what your curtains would look like if they weren’t supported by the rod pockets.

This is where your rods will go, and they can be made to attach to the cloth or to be a tool.

Curtain pockets can be designed in a different style that will make them more visually appealing.

You never know what’s around the bend.

You’ll need to select one that feels right to you.

This one, on the other hand, is plain and straightforward.

This can be done in a variety of more complex and comprehensive methods.

To begin with, this is a fantastic option for individuals who have little or no experience with sewing or curtains. Don’t worry, because you already had the notion after reading all the instructions we gave you previously.

Check out blogs like the one where you saw this article for more information.

Curtains are one of many subjects and questions for which we have answers.

Check us out if you want to learn more about these topics in depth.

And that’s how you build curtain rod pockets.

Conclusion

If you wish to adapt an existing curtain, knowing how to sew rod pocket curtains will make the process much simpler.

If you’re comfortable with the fundamentals of sewing, you might even make other styles of curtains.

You can also add a few embellishments to your outfit if you’d like.

You can do whatever you want, and I hope you get a lot out of it!