Updated at: 19-04-2022 - By: Sienna Lewis

How to sew swag curtains is the subject of this blog post. Without taking up too much area, they are an excellent way to enhance the appearance of any place. You’ll learn how to make your own custom-designed curtains in this lesson!

Things You’ll Need

  • Tape measure for measuring
  • Scissors
  • There is a sewing machine in the room
  • Iron

An easy way to dress up a window is with a swag valance, which can either be paired with an existing curtain panel or used on its own to create a polished look. One of the most easy window coverings to build yourself is the Swag Valance. Draping and no pockets or tabs are usually all that is needed for these garments. This simple craft may astound anyone.

Step 1: Decide on the Size of Your Swag Valance

Make a decision on how far over the window you want your swag valance to extend and how high you want it to be (only in the case of a valance not intended to be hung over the existing panels). Your window swag should be equal to 1/4 of the window’s height, plus an additional inch in breadth.

Step 2: Measure the Curtain Rod

You’ll need to know how long your rod is and where you want the end of your swag to finish up hanging. Decide on a fabric and twice this measurement for the length.

Step 3: Calculate the Material Width

Measure the distance from the top of the curtain rod to the bottom of the window where you want the swag valance to hang. Allowances for draping and hemming can be added in increments of six inches.

Step 4: Choose the Fabric

Choosing a material that is easy to drape, such as silk, imitation silk, or velvet, is recommended. Hemming can be made easier if you choose a material that isn’t easily frayed, making the process more efficient. Make sure to inspect the raw edge of the fabric you’re purchasing to see how readily it unravels.

Step 5: Cut the Material

Measure and cut the material according to your specifications. Before hemming, measure the length and width of your curtain by laying it across the curtain rod. Make modifications to the length as necessary, as there should be lots of spare fabric.

Step 6: Fold and Sew

Fabric is folded into quarter-inch strips and ironed to flatten the edges. Along the entire length, stitch 1/8 inch from the edge. Fold the edges a further half inch, then iron them again. The outside of the piece should be sewn with a straight seam 1/8 inch from the edge of the fabric. Take care of any loose threads.

Step 7: Drape the Swag Valance

With the central valance hanging above the rod’s front and the ends behind, the swag valance should be draped over the upper half of your curtain rod. To the front, adjust the vertical length to your liking. The upper portions of the swag should be hidden behind and out of sight if it is being used to cover the curtain panels above. If you want to cover the sides of the swag drape, do so in a way that looks good.

Tip

Always include more material in your measurements if completely certain about the width and length. For a fraction of what you’ll pay for the additional material, you may end up like it more than you expected, and it may even be longer than you had anticipated. It is always possible to reduce it, but you cannot increase the length.

Always include more material in your measurements if completely certain about the width and length. For a fraction of what you’ll pay for the additional material, you may end up like it more than you expected, and it may even be longer than you had anticipated. It is always possible to reduce it, but you cannot increase the length.

What are Swag Curtains?

If you are quite positive about the dimensions of your project, always include more material in your measurements. For a fraction of what you’ll pay for the additional material, you may end up like it more than you expected, and it may even be longer than you had anticipated. You can always shorten it, but you can never make it longer.

If you are quite positive about the dimensions of your project, you should always add more material in your measurements. The cost of the additional material will be less than the disappointment of ending up shorter than you expected, and you may even find that you love it longer than you expected as you had envisioned. The length can never be increased but can always be reduced.

How do I Wash my Swag Curtains?

Cold water and a mild cycle can be used to clean fabric by hand or in a washing machine. Your curtains will not shrink if they are hung out to dry after being washed and dried. Storage in an airtight container is also recommended when they are not in use.

What is the difference between a swag curtain and Tier curtain?

At the very tops of the windows are swags, long, slender strips of drapery. The bottoms of windows are covered with fabric panels known as tiers. They can be dressed up or down, depending on the occasion. Window treatments such as panels, tiers, and mini blinds can all be enhanced with the addition of valances, which are just a fabric top treatment.

Are curtain swags outdated?

There is a question of whether or not the valances in your home are old and outmoded. The answer is yes if the word “valances” conjures up thoughts of draped fabric adorning window frames. Valances hold a wealth of possibilities just waiting to be explored.

Can I Bleach my Swag Curtains?

Bleaching the curtain is possible. Make sure you follow all of the instructions. It is best to use a gentle detergent for fragile materials and linens. Using cold water and gentle cycles, wash curtains prior to bleaching them. Rinse them three times thoroughly before placing them in the dryer to dry.

Can I Iron my Swag Curtains?

If the curtains do not have any apparent embellishments like stitching or appliques that could be harmed by the ironing boards, then yes, you can use a hot iron to press them.

First, check the fabric for colorfastness and, if necessary, use a cloth between the iron and curtain fabric to protect the fabric from the heat.

Can you dye Swag Curtains?

Yes. However, you should first test the curtain to see if it is colorfast before proceeding. Use white vinegar instead and then soak the curtains in hot water using two cups of vinegar for every gallon of warm and clean water if the fabric is non-colorfast. For about 20 minutes, or until they’re pliable enough to work with.

Do I have to put my Swag Curtains?

Folding drapes is, in fact, a possibility. To avoid wrinkling, press the incorrect side of the paper first before folding it in half.

How do you make a swag curtain?

To begin, hang one section of the swag from the end of a long piece of string. You can then hang the other end of the swag above the first. That piece of fabric in the middle is drooping to the ground. A conventional curtain swag will look like the material hung in the middle after you’ve finished.

Can I add a Valance With my Swag Curtains?

Yes! Adding a valance to plain or simple curtains can transform their appearance while taking up very little time and effort. With a few little tweaks, it is feasible to add a valance to your swag curtains in the same way you would for any other curtain.

Are swags old fashioned?

The term “traditional” doesn’t necessarily imply a return to more conservative aesthetics. Traditional-style window furnishings include Sheers, Swags, Tails (Jabots), Valances, and Pelmets.

Are swag curtains in style?

Not in style any more. Replace the wooden blinds with honeycomb-style blinds, which are better at insulating. Consider picking up the most recent issue of “house beautiful” if you’re in a store with an extensive magazine selection for some fresh fashion ideas. In the modern world, swag is a thing of the past!