If you’re looking for a window treatment that is both traditional and elegant, consider pinch pleated drapes. Pinch pleated curtains can be made by anyone with basic sewing skills. Your room’s color scheme should be taken into consideration while choosing drapery fabric. Determine the amount of cloth needed for pinch pleated drapes, and then purchase enough fabric to sew them from a fabric store or online retailer.
How to Hem Curtains Without Sewing?
Requirement
You’ll need the following:
Bạn đang xem: How To Hem Curtains Without A Sewing Machine? Step by Step Instructions
- Using a tape measure
- Pins
- Tape for hemming
- Iron.
Step 1. Measure the required length
To make sure the curtain is the correct length, hang it from the rod first. It’s up to you whether or not you want the curtain to hang flush with the floor or a few inches above it. The length of the curtain is entirely up to the individual. To determine the exact length needed, simply use a measuring tape.
As a last resort, you might measure the distance from the curtain rod to your window. In order to hang the curtain, you’ll need to provide room for rings or loops.
Step 2. Spread the curtain flat
For simple trimming, lay the curtain on a flat surface with the wrong side facing up. It is advisable to place the drape on the floor because of its size. You can lay a tiny curtain across a large table if you have both.
Step 3. Fold the curtain
If the curtain is huge, then it will typically have a broader hem than a smaller one. Curtain hems are always folded twice, so keep that in mind. Here are some typical curtain hem measurements.
The hem should be at least 2 inches wide for small curtains. As a result, you’ll need an extra four inches of cloth to hem your garment.
The hem of a standard-sized curtain measures between 3 and 4 inches. For the hem, you’ll need 6-8 inches of extra fabric.
You need a 5-inch wide hem for longer curtains. Because of this, you will need 10 inches of extra fabric for the hem.
The hem can be folded and pinned up depending on the length of the curtain. The folded hem can even be ironed to maintain its shape. You can trim off any excess fabric if necessary.
Because linings are typically tucked into the side hems of curtains, it’s best to store them separately.
Step 4. Iron with hem tape
Fabrics are held together by the hem tape or stitch witchery. Cut the hem tape to a length slightly less than the width of the curtain’s hem. Place it between the curtain’s back and the folded hem so that it lies flat.
Place the iron over the hem for a few seconds to heat it up. Repeat this across the curtain’s length. Make sure to read the instructions on the hem tape packaging while you’re doing this.
Hem tapes with paperback and adhesive on both sides are available. You should iron the adhesive side of this sort of tape first before removing the paper and adhering the other side again.
How to Hem the Sides of the Curtain?
Step 1. Measure the width of the curtain
Xem thêm : How To Sew A Cylinder Pillow? Easy Step-by-step Guide
Double-folded 1 12 inch side hems are common on curtains. For hemming, you’ll need a minimum of three inches of fabric on the long side. Curtains need 6 inches of extra fabric for side hemming, so allow for that when measuring.
Step 2. Fold the curtain
Fold the curtain 1 12 inches from the side at several points. Once folded, press it with an iron and fold it one more time to get the desired hem. Pins can also be used to secure the hem.
Step 3. Tuck the lining
Cut the liner to the desired width if the curtain has one. Finally, hide the raw edges by stuffing them in between the side hems.
Step 4. Place the hem tape
Trim hem tape to a length just a hair under the width of the side hem of the garment. Tuck it in between the curtain and the hem of the garment. Make certain that the outer side of the hem is aligned with the hem tape when you place it. For the final touch, place a hot iron just above the hem for a brief period of time. Keep doing this until the entire hem has been bonded.
The curtain has been hemmed and is now ready to be hung.
How to Hem The lining of a Curtain?
Step 1. Measure the length of the hem
It’s common practice for the lining hem to be 1 inch smaller than the curtain hem. To put it simply, if your curtain hem is 2 inches wide, then your curtain lining hem should be 1 inch wide. Remember that curtain linings are typically 1 inch shorter than the curtain’s length.
Step 2. Remove the side hem
If you’re hemming a store-bought curtain, you’ll need to take this step. The lining will be tucked into the side hems of this style of curtain. Pull out the lining by opening the bottom of the side hem. The liner can now be lengthened or shortened to suit your needs.
Step 3. Fold the lining
The lining is now ready to be folded to the desired length for sewing. But when it’s folded, the lining should be an inch or two higher than the curtain’s overall height. For the most part, linings should be longer than the curtains.
Step 4. Fuse with a hem tape
Cut hem tape that is slightly smaller than the hem width. Tuck it in between the lining and the hem of the garment to prevent it from slipping out. Fuse it to the fabric by placing a hot iron on top.
Step 5. Tuck the lining to the side hem
Remember to tuck the lining back into the side hem after removing it, and then sew the edges closed.
What to Consider While Hemming Curtain?
Before hemming the curtain, always wash it. Starch and other impurities can be removed with this method.
Hand stitching or hem tape can be used instead of sewing machines if you don’t have access to a sewing machine.
It’s preferable to measure each individual panel’s length independently if you have many curtain panels to hem.
Check the instructions on the packaging for proper use of hem tape if you’re using it. Iron on both sides to ensure a stronger bond between the fabric and iron.
You can use a damp cloth between the curtain and iron as a shield while pressing down on the tape to prevent damage to the fabric. The damp cloth not only protects the fabric, but it also generates steam, which aids in the melting of the tape and strengthens its binding.
Xem thêm : Who Makes Elna Sewing Machines? Everything To Know!
To unwind the stitches on a store-bought curtain hem, use a seam ripper.
A heavy-duty tape should be used if the curtain fabric is particularly thick.
To avoid using hemming tape while hemming curtains, try using fabric glue instead. The fabric glue should only be used sparingly because it dries so quickly.
Avoid using adhesive on sheer or transparent curtain material since it gives an unpleasant appearance.
If you’re in the habit of switching out your curtains from room to room, instead of cutting the surplus fabric, tuck it in. This manner, if you need to make changes, you can do so.
What to do if your Curtains are Small?
It’s possible to make a short curtain look longer without sewing if you don’t want to throw it away but still like the way it looks. To make your choice, follow the directions listed above.
How to Line up Curtains Without Sewing?
Simply sew your curtain’s lining to the top of the curtain rod from inside out. Press together with an iron to form a strong binding. Line and join curtains without sewing with the fusible hemming web, as indicated above.
Must Curtains Touch the Floor?
Yes, it is correct. Allowing your curtain to reach the floor adds a beautiful touch to the room.
What is the length of Bedroom Curtains?
It all depends on the height of the wall you’ve got.. However, the curtain is available in a variety of lengths, including 64, 84, 95, and 104 inches.
It’s A Wrap!
It’s done!
Just select one of the two techniques, follow the instructions, and you’ll be done in no time.
With no sewing machine required, this can be completed in a matter of hours.
The curtains can be hung back up now if you had taken them down before you started the process.
If you don’t have one, you can hem curtains like this without one.
It was a great job!
Nguồn: https://spasifikmag.com
Danh mục: Sewing Tips
