Updated at: 19-08-2022 - By: Sienna Lewis

Even if you don’t see soffit or fascia, there’s a high possibility they’re up there on your roof. Soffit is a board that bridges the gap between the roof and the siding. However, fascia is the board that supports the gutters. Ice damming and roof leaks are two of the most common causes of damage to these often overlooked roofing parts in colder climates. Squirrels, raccoons, and other animals often use these boards as nesting material, which can lead to structural damage.

When looking for a contractor, you should consider the cost of replacing broken soffit and fascia. Costs range from $600 to $6,000 for soffit and fascia repair.

Main Causes Of Faucet Damage

Sometimes fixing a leaky faucet in Spring Hill, Florida requires the expertise of a licensed plumber. Farrell Plumbing is here to help with all of your plumbing needs, but avoiding unnecessary calls can save you money.

Home Care 101: How Much To Repair Water Damaged Soffit - Krostrade

Damaged Components

One of the most common reasons customers call a plumber in Spring Hill, FL is to have a part replaced that has been damaged. Having a skilled plumber check for damage to the faucet’s mechanical parts can sometimes prevent the fixture from leaking or otherwise not functioning properly.

Larger Plumbing Leaks

It is possible that the water supply line leading to the sink is leaking. Pipes that have been damaged in any manner should be inspected by licensed plumbers in Spring Hill, FL. Concentrated damage, especially in the context of an older or more complex system, can be challenging to repair.

Water Pressure Issues

It’s possible that the intermittent dripping of your faucet is due to low water pressure. The water pressure can be optimal at times, but it can also be excessive or insufficient at others. Repairs to the water pressure valves in Spring Hill, FL may be part of routine maintenance to guarantee optimal plumbing performance.

Whatever the state of your pipes or fixtures, Farrell Plumbing has you covered. Our licensed plumbers in Spring Hill, Florida are available 24/7 for any plumbing emergency. Make an appointment with us as soon as possible!

How to Repair Common Water Faucet Problems

Nowadays, it’s not easy to find a replacement part for a water faucet or figure out why it won’t turn on. The process of installing a faucet is still quite conventional, but there are some additional considerations brought about by technological advances that you should be aware of.

Once it’s hooked up, there could be noises and other problems with the faucet’s operation. A number of common issues, and their solutions, are detailed below.

Low Water Pressure

Typically, spray diverters are to blame when water pressure is poor at the sink. A diverter valve, a little device hidden inside the faucet, allows you to adjust the water flow. The diverter, which regulates the water flow into the faucet, may be clogged with dirt and minerals and will need to be cleaned. Even if the diverter is not clogged, replacing it may still be necessary.

The aerator is another area where you may be to blame for low water pressure. Aerator cleaning is analogous to diverter cleaning. Drain debris and obstructions can be removed with vinegar as well. To rule out a lack of water pressure from the utility as the cause of the issue, make sure all of the supply valves are fully open.

Spray Misting From Faucet

The aerator is another area where you may be to blame for low water pressure. Aerator cleaning is analogous to diverter cleaning. Drain debris and obstructions can be removed with vinegar as well. To rule out a lack of water pressure from the utility as the cause of the issue, make sure all of the supply valves are fully open.

Faucet Handle Leaks

Your aerator could also be to responsible for the weak water flow. The aerator may be cleaned in the same way that the diverter can. If you have a clogged drain, you can use vinegar to dissolve the clog and flush away the debris. To rule out a lack of water pressure from the utility as the cause of the problem, make sure all of the water supply valves are fully open.

Drips From the Spout

Another common problem is water dripping from the faucet’s spout. When installing a compression style faucet, it is necessary to replace the seat washer and/or valve seat. All other types of water faucets merely require the valve seat to be replaced.

Faucet Noises

If you hear a banging or slamming sound after you’ve switched off the water, water hammer could be the cause. In some cases, an airtight chamber is the only way to tackle a situation like this.

If air chambers are already set up, the water supply can be shut off, the line drained, and the water turned back on. It could be that the washer on the valve needs replacing, or that the water pressure coming in from the supply line is too high or too low.

Faucet Handle Is Difficult to Operate

Damage to the cartridge from sediments or debris is the most common cause of a sticky handle. The cartridge’s seal could be compromised by foreign bodies such as dust, dirt, or shards of metal.

It is probable that you may need to change the cartridge or lubricate it with oil containing silicone. Do not use petroleum-based lubricants, such as plumber’s grade faucet grease or silicon spray, on your faucets. Oil-based lubricants may cause a reaction with the rubber seals, making the handle even more stiff.

Soffit and Fascia Repair Cost Breakdown

Soffit and fascia repair estimates are typically free of charge, so you can get a ballpark figure for the work that needs to be done. You may need to repair certain boards while replacing others, depending on the complexity of your roof and the severity of the damage. We deal in linear feet of soffit and fascia. For repairs to look seamless, professionals advise replacing sections that are at least 8 feet in length. Professional fascia and soffit installation or repair can run anywhere from $6 to $20 per linear foot, with the final cost determined on the quality of the original material.

This article will provide you a detailed estimate of the money you may expect to spend on hiring a roofer, contractor, or gutter installer to fix or replace your soffit and fascia.

Materials

Fascias and soffit boards can be made from a wide variety of materials, each with its own advantages and drawbacks as well as price point. Standard lengths for soffit boards are 12 feet, while fascia boards are sold by the foot.

Ami Feller, owner of Feller Roofing, adds, “Generally, a repair will match the current material, if available.” Common materials for fascia include pine, cedar, and fiber cement. Soffits can be constructed from many materials, including plywood, fiber cement, or tongue and groove boards.

Wood

The most common material for fascia and soffit boards is wood due to its low price, high aesthetic value, and ease of installation. In contrast to other materials, damaged wood planks can be mended rather than thrown away and replaced. However, keep in mind that wood is quite susceptible to a wide variety of sorts of damage. Soffit boards are more expensive, at $14 to $22 each 12-foot board, than fascia boards, at $1 to $3 per linear foot of wood.

Soffit Repair: Tips From a Pro - This Old House

Vinyl

Vinyl boards are a common substitute for wooden ones among some homeowners since they are more resistant to moisture and rot. It is unappealing to termites and other pest insects, so they don’t bother eating it. Vinyl fascia boards cost between $5 and $8 per linear foot, while 12-foot sections of vinyl soffit boards cost between $14 and $23.

Composite

Composite boards are made mostly from recycled wood chips, sawdust, and epoxy resin. These boards may be expensive, but they will endure a long time and won’t rot or fade. The price per foot for composite fascia boards is $2 to $8, whereas the price per foot for composite soffit boards is $12 to $20.

Aluminum

Like composite, aluminum boards are more expensive and difficult to install, but they last longer, require less care, and look better for longer. Aluminum fascia boards range from $8 to $20 per linear foot, while aluminum Soffit boards cost $10 to $22 for a 12-foot length. In addition, due to the metal’s heaviness, you may need to include for an extra worker’s salary in your budget.

Labor and Accessibility

Roofing and other craftsmen can charge anywhere from $40 to $80 per hour. Soffit replacement can cost anywhere from $1.50 per square foot to $3 per square foot, while fascia installation can cost anywhere from $6 to $20 per linear foot.

Accessibility also plays a role in the total cost of labor. If your roof is inaccessible or if your boards are in an inconvenient place, you may see an increase in labor costs of 7–15 percent.

Drip Edges and Gutter Replacement

Fascia and soffit board replacement often requires new drip edges and gutters. Installing drip edges, which channel water to the downspouts, can set you back between $1 and $2 per linear foot. Gutter installation costs in your area range from $100 to $1,100, with prices fluctuating depending on the type of gutter and the difficulty of removing the old ones.

What Factors Influence the Cost of Soffit and Fascia Repair?

Fascia and soffit repair costs might be difficult to predict without considering a variety of additional factors.

Painting

Soffit and fascia boards are frequently painted to harmonize with the color scheme of the roof and the rest of the home’s exterior. While the expert is working on your boards, you might have them painted by a professional. Fascia and soffit painting can cost anything from $2.50 to $6.00 per linear foot. It’s necessary to repaint pre-painted vinyl, composite, and aluminum boards after a few years of use.

Upgrading Soffit Vents

Soffits provide for enough air flow in your attic, reducing the likelihood of mold growth and keeping humidity levels manageable. You may need to modify your soffit vents if you live in an older home to ensure appropriate airflow. Why not do this at the same time as getting the circuit boards replaced? To replace soffit vents can set you back between $3 and $5 per square foot.

Eave Configuration

Because of the increased airflow created by the soffits, mold growth is inhibited and the relative humidity of your attic is kept at a manageable level. If you have an older property, the soffit vents may need to be altered to allow for sufficient ventilation. I don’t see any reason why this couldn’t be done at the same time as the circuit boards were being replaced. Changing the soffit vents will set you back between $3 and $5 per square foot.

How Much Does It Cost to Repair Soffit or Fascia Boards Yourself?

Roofing repair is dangerous and time-consuming; if you don’t know what you’re doing, you shouldn’t even try it. You must, for instance, use extreme caution and the proper footwear. Let the experts handle everything and enjoy your weekend more.

Repairing or replacing your fascia and soffits on your own can save you money. Repairing fascia boards can save $6 to $20 per linear foot, and repairing soffit boards can save $1.50 to $3 per linear foot. You will need to get a circular saw for cutting fascia and a nail gun for nailing it down, as well as other equipment, as well as transport them to the job site.

FAQs About Soffit and Fascia Repair

How do I find a reputable soffit and fascia repair specialist?

Soffit and fascia repairs are done by a variety of tradespeople, including roofers, gutter specialists, general contractors, and others. Before hiring a company to make any repairs or replacements, you should look them up on the web and at the BBB. Call them up and have a chat about it. If you ask a knowledgeable expert a question, they will answer it with authority. Contacting references might also give you insight into their work ethic.

What information should I have ready for my soffit and fascia pro when I reach out for an estimate?

If you can, take pictures of the damage, but if you have to climb on the roof to do so, do so very carefully. You should also be aware of the types of materials used to construct your current soffit and fascia boards, as well as the date on which they were last serviced. If you’ve had any large or unusual roof repairs done, be sure to let your contractor know. Finally, you need to calculate your roof’s overall area.

What other projects should I do at the same time?

If you’ve been putting off roof-related repairs or maintenance, now is the time to get them done. Soffit and fascia boards should be cleaned and maintained, the gutters should be cleared of debris, and the roof should be checked for any other concerns that could lead to damage.

How much is soffit labor?

If you’ve been putting off roof-related repairs or maintenance, now is the time to get them done. Soffit and fascia boards should be cleaned and maintained, the gutters should be cleared of debris, and the roof should be checked for any other concerns that could lead to damage.

How do you repair old soffits?

Repairs or maintenance to the roof should not be put off any longer. The roof should be inspected for any problems that could lead to damage and the soffit and fascia boards should be cleaned and maintained.

What causes soffit damage?

The soffit and fascia are especially vulnerable to the effects of weather and UV rays, which can lead to rot and decay. Exposed soffit and fascia boards may rot either wet or dry if left outside for too long. Cracks can form in vinyl siding after being damaged or subjected to freezing and thawing temperatures.

Do soffits need replacing?

Soffits and fascia boards play a crucial role in the overall structure of a house. They prevent rain from getting inside the house and serve as a protection for the roof. While fascia and soffits can last for many years, every homeowner should know the signs that indicate it’s time to repair them.

How often should soffits be replaced?

Signs When Should I Replace It/Have It Fixed? Wind, humidity, sun, rain, and pests can all do significant damage to them. Fascias and soffits should be inspected annually to ensure they are in good shape.

How many pieces are in a box of soffit?

There are 1.92 square feet and 16 pieces of 12’0″ length in every Triple 4 carton.

Can you put new soffit over old?

When renovating an older home, most builders and homeowners will need to put vinyl soffit over the existing wood. As a result, some preventative measures are in order to ensure that the wood underneath the new layer does not rot.

Soffit Installation: Soffit Panels - YouTube

Can you replace soffit yourself?

With these guidelines in hand, you should be able to swap out the broken panel for a brand new one without any problems. The majority of homeowners who don’t want to deal with soffit problems opt for aluminum soffits. Aluminum soffits are great since the paint won’t chip and the metal won’t rust or deteriorate.

How do you fix a hole in a soffit?

Nail strips along the soffit hole’s perimeter to the rafters or rafter lookouts. Carefully snip out a replacement for the damaged area. The patch needs to be slightly smaller than the hole so that new tissue can grow in. Careful matching of tongue and groove patchwork to the preexisting soffit is required.

Is the soffit part of the roof?

Covering the underside of your roof, the soffit keeps some of your attic space dry. Your roof’s rafters and the underside of your overhang would be visible without soffits.

Can you paint soffit?

Soffits made of aluminum alloy that does not absorb moisture This makes them inappropriate for any kind of painting. Be sure to use an acidic base coat suited for metal surfaces when painting the soffit. Once the soffits have been primed, they will be painted.

Do roofers replace fascia?

If your fascia board needs replacing at the same time as your shingles, the shingles will go up first. Fascia board repairs are impossible without first removing the gutters, which are fastened to the fascia board.

Is soffit and fascia expensive?

Cost of Soffits and Fascia Depending on the quality of the material and the degree of difficulty involved in the installation, the price of fascia and soffit work can range from $6 to $20 per linear foot.

When should I replace my soffit and fascia?

When having a new roof built, it is a good time to have any damaged fascia and soffits replaced as well. If you are having your roof replaced as part of an insurance restoration claim, make sure to have the claims adjuster take care of any fascia or soffit that may have been damaged in the process.

What is the difference between a soffit and a fascia?

The soffit is installed in the space under the eaves, between the roof and the wall. The board that connects the overhang to the roof is what completes the look of your roof. Your gutter fascia board should sit atop your gutter. Fascia can also be referred to as the “transition trim” between the house and the roofline.

How do I know if I need new soffit?

Substitute Your Fascia and Soffits There Are 5 Telltale Signs Paint defects such as chips and cracks are visible. Creatures from the insect kingdom have been identified. Asbestos exposure is a possible cause. When you go up on the roof, you’ll see that the void is damp. Lack of Adequate Ventilation.

What is the point of soffits?

In order to keep the rafters dry, soffit is installed. If the rafters are maintained dry, mold growth will be inhibited. Soffit is a quick and easy way to give any area a unique look and feel.

Are soffits and eaves the same thing?

Remember that the eaves are the roof’s bottom border that projects past the wall’s face. A roof has components known as rafters, fascia, and soffits. A building’s soffit and eaves are two independent yet interrelated parts.

How long is a piece of soffit?

Soffit panels come in lengths of 12 feet and can be ventilated or non-vented. In a vented soffit, air may flow through the thousands of tiny holes without attracting insects.

How much does aluminum soffit cost?

When constructing an aluminum soffit in the United States, expect to pay between $2.06 and $3.11 per linear foot for the necessary supplies. The price per linear foot for labor and materials is roughly $10.36 and can go as high as $13.87. There is usually a $685.90 – $1,386.38 price difference over a period of six days for a project with a length of 100 feet.

How much does it cost to put vinyl siding on a 1500 sq ft house?

Vinyl siding installation on a 1500 square foot home can cost anywhere from $7,500 to $12,000. The fee is $4,500 for a work that spans 1,500 square feet.