Updated at: 07-05-2022 - By: Sienna Lewis

To address the question “How do I relight my gas stove’s pilot light?” check out this guide! A pilot light, which is a little flame that is always lighted and ready to ignite your cooktop’s burners if you have an older gas stove, is almost certainly there. In addition to dust and dirt, a draft or simple troubles with an old pilot light and burner gear can extinguish that flame. You won’t be able to cook anything if the flame goes out on your burners.

Your first or fifth gas stove will benefit from your own expertise of how to relight the pilot lights burner. It’s time for some elbow grease. If your pilot light is out, it’s time to relight it.

For some home cooks, a gas stove is a necessity. Other people’s homes came with a gas stove, which they are still getting used to. When using a gas stove, the pilot light is one of the most worrisome features. In certain stoves, the pilot light doesn’t come on, and the burners keep on sputtering. Some stoves’ pilot lights go out once or twice a week, and when that happens, you have to stand there in the stove for many minutes trying to relight it.

While relighting your pilot light is straightforward, it’s important to remember that a recurring problem with your pilot light could suggest a need for a new gas stove (on average, a gas stove lasts about 13 to 15 years, depending on upkeep). Electric ignition mechanisms in today’s gas ranges and cooktops eliminate the need for a pilot light, making them more dependable and efficient than previous models.

Relight a Gas Water Heater’s Pilot Light

Forget about enduring a scalding bath! If your water heater’s pilot light is out, check for relighting instructions fastened to the appliance. If your water heater doesn’t come with instructions, this simple approach should work.

How to Light a Pilot Light

STEP 1: Remove the access panel.

Forget about enduring a scalding bath! If your water heater’s pilot light is out, check for relighting instructions fastened to the appliance. If your water heater doesn’t come with instructions, this simple approach should work.

STEP 2: Turn the gas regulator valve to “Off.”

It’s not worth it to sit through a scalding shower! If the pilot light on your water heater has gone out, look for instructions on how to relight it on the heater itself. Even if your water heater doesn’t come with instructions, this basic approach should work for the majority of them.

STEP 3: Turn the temperature down.

This valve is located next to the gas regulator valve. Make sure it’s on the lowest possible setting. The lowest setting on certain water heaters is designated for pilot lighting.

STEP 4: Assess the type of pilot ignition.

To ignite the pilot light on an older water heater, you may have to use a flame. To avoid exposing your hand to the flame, you’ll need a butane barbeque lighter or fireplace match that’s long enough to reach the pilot.

Look for a red button or switch near the regulator valve if your water heater is a little newer. The “Pilot ignition” or something like will be the name of the red button. There is no need for a separate flame when using a water heater with an ignitor.

STEP 5: Turn the gas regulator valve to the pilot position.

Switch the gas regulator valve from “Off” to “Pilot” to get the gas flowing.

STEP 6: Light the pilot light.

An old-fashioned water heater requires you to depress the regulator valve and then light the pilot valve with a match or lighter. After you see the pilot light ignite, don’t let go of the regulator valve for about a minute. This allows the thermocouple enough time to kick in and detect that the pilot light has been turned on properly.

For water heaters with ignitors, simultaneously depress the red ignitors and the pilot valve. Continue to apply pressure until you see the pilot light ignite, and then for another minute or so to ensure that it remains lighted. Continue pressure.

STEP 7: Turn your water heater back on.

Reset the temperature valve and turn the gas regulator valve back to the “On” position. Your water heater should never be set higher than 120 degrees Fahrenheit for your own safety’s sake..

STEP 8: Replace the access panel.

Over the pilot light, secure the access panel with screws or a snap.

Relight a Gas Stove’s Pilot Light

Even if a burner’s pilot light goes out, there’s no need to stop using it. Consult the owner’s handbook for your equipment, which you can often get online if you don’t have it handy. It should follow a similar path to the one outlined above.

STEP 1: Switch everything off.

When cooking, make sure that all burners are off and the oven is not on.

STEP 2: Remove the burners.

Prior to putting them away, you may choose to give them an extensive cleaning.

STEP 3: Expose the pilot light valves.

You can lift the drip pan from certain stovetops, but others require you to remove the entire cooktop. It doesn’t matter if the stovetop is closed or open; when the stovetop is open, you should be able to see two pipes connecting the burners on either side. Each of these little pipes has a pilot port in the middle.

STEP 4: Clean it up.

Disinfect the pilot light valve and the gas pipes by wiping them clean with a cloth or paper towel.

STEP 5: Light the pilot light.

Flames from a long fireplace match or butane barbecue lighter should be applied to the pilot light ports to start the flames. In theory, the flame should come to life practically instantly.

STEP 6: Close up the stovetop.

Reinstall the drip pans or lower the stovetop lid. Put the burners back where they belong.

Relight a Gas Oven’s Pilot Light

You should check the pilot light if your oven isn’t getting hot enough to cook your casserole.

STEP 1: Ensure the entire appliance is off.

Make sure the oven and all burners are turned off.

STEP 2: Look for the oven’s pilot light.

Pilot lights can be hard to find in the oven compared to stoves, so you may have to get creative in order to find and access them. Your oven’s pilot light may be located in a front or back corner of the oven, in the center near the door, or even at the back of the oven, depending on your brand and type. Often labeled “Pilot Light,” you’ll notice a little hole with an extremely small valve within. Check with the manufacturer if you can’t find it on your own.

STEP 3: Apply flame.

The pilot light valve can be lit with a long match or a BBQ lighter. In most cases, the flame will ignite fairly immediately.

How to Light the Pilot Light in Your Hotpoint Oven: – 1st Source Servall Blog

Relight a Gas Furnace’s Pilot Light

Wearing a sweater or shivering in agony is unnecessary. It’s not difficult to relight the pilot light of your gas furnace. While checking the instructions is always a good idea, you can expect this process to be as straightforward as it appears above.

STEP 1: Turn off the furnace’s gas valve.

To turn on or off your furnace, look for a little valve near the bottom of the unit marked “On,” “Off,” or “Pilot.” Wait five minutes for any remaining gas in the pipes to dissipate before turning the valve back on.

STEP 2: Light the pilot light.

Turn the “Pilot” switch on. A little “Reset” button can be found near the valve. Your lighted match or butane fireplace lighter can be used as a pilot light. Wait until the pilot light comes on before releasing the button.

STEP 3: Turn your furnace back on.

The valve should now be in the “On” position.


Still having trouble with your pilot light?

If your pilot light continues to go out in any of the aforementioned conditions, you may have a faulty thermocouple. Most people prefer to have a professional handle this procedure, even though it could cost as little as $20 to replace this part.

What happens if the pilot light goes out on a gas stove?

Gas can still leak from the pipe if the pilot light fails to stay lit. However, instead of adding fuel to a fire, this money is going straight into your pocket. When the light goes out, the pilot light has a safety valve that should shut off the gas supply. If the valve is working properly, gas will not be able to leak out of it.

Can I relight the pilot light by myself?

Your furnace won’t be able to generate heat if your pilot light goes out, as the burners won’t be able to start. Most of the time, homeowners are able to relight the pilot on their own without professional assistance.

What happens if the pilot light goes out on a gas stove?

Ignition System for a Gas Stove There is a little gas flame that is always lighted up in the pilot light of a stove. There is a safety valve that closes when the pilot light goes out or doesn’t burn hot enough, preventing gas buildup in the house.

Why won’t my pilot light light on my stove?

Hold a lit match to the pilot orifice if no reset button or gas valve is present. Step 3: Have a professional adjust the pilot flame if it won’t stay lit after multiple tries. The pilot light will go out if the thermocouple fails. It is necessary to replace a thermocouple that has been damaged.

What do I do if my pilot light won’t light?

The thermocouple may be to blame if your pilot light won’t remain lit. The thermocouple sensor might become clogged with dust. Relighting the pilot light after cleaning the thermocouple may help. The thermocouple may need to be changed if it continues to fail.

Do gas stoves have a pilot light? - Perfect for Home

Is there a pilot light on a gas stove?

A number of newer gas stoves and ovens do not have pilot lights. Instead, an electronic ignition mechanism is used to start the gas. When an electric current is passed through an element, it becomes hot and glows like a filament in a lightbulb. The gas is ignited by the filament’s heat.

What makes pilot lights go out?

Some of the more catastrophic causes of pilot light failure include incorrect venting, low gas pressure, or high winds, all of which can result from a variety of factors. Consult a specialist as soon as you suspect there is a significant issue.

Can I light a pilot light with a lighter?

Yes, you can use a gas lighter to start a pilot light. To get things started, turn the burner knob to “pilot.” Using a gas lighter, light the pilot light while holding the knob in place. Adjusting the flame is as simple as turning the burner knob to the ‘on’ position.

Does gas turn off when pilot goes out?

In the event that your gas supply is cut off, your pilot light will go out as a result. To relight your pilot light, either turn your gas back on and do it yourself, or call a professional.

How do you light a gas oven with a lighter?

A Gas Oven Pilot Light How-to Make sure the oven is off before you begin cooking. You’ll find the pilot light in the bottom of your oven if you open the oven door. A grill lighter or long match can be used to start the oven’s pilot light. Some ovens require the user to manually start the burners each time they are used.

How do I know if my stove has a pilot light?

Gas tubes can be seen if the oven has an oven pilot light, which may or may not be lit. You’ll observe an insulated electronic component in the center of the burner if the oven includes a glow bar.

Why is my gas heater not igniting?

A malfunctioning pilot light or ignition sensor is typically the most common cause of a furnace that won’t start. To locate the ignitor or ignition sensor, remove the front panel. The burners are usually where this is positioned. The sensor or ignitor must be cleaned if it is clogged.

Can you manually light a gas stove with electric ignition?

You can use a match to ignite the surface burners of an electric ignition gas or dual fuel range or gas cooktop if there is a power outage. Hold a lit match to the burner while turning the knob to the “low” position.

How do I know if my gas oven is on?

The pilot light in your oven is out. The gas in your oven is ignited by a glow bar ignitor. With a working glow-bar, a gas safety valve will open and let out gas if it can draw enough electricity to do so Glow bar failure means that the gas valve won’t open.

How does a gas stove pilot light work?

Pilot lights are straightforward to understand. Its primary function is to light the main burner’s gas with a flame. Gas is released into the burner when the furnace “turns on,” and the pilot light ignites that gas. All the time, you light the gas flowing from the tube.

Do all gas appliances have a pilot light?

Despite the fact that pilot lights are no longer used in gas-powered furnaces and other gas-burning equipment, such as stoves and water heaters, they remain a common sight. Today’s furnaces use a variety of electronic ignition mechanisms to start the gas flow.

Can a gas stove explode?

The most common cause of a gas stove exploding is if it isn’t properly maintained. If the stove has a gas leak, or if a burner isn’t working properly, this could happen. Even while modern gas stove explosions are uncommon, this doesn’t rule out the possibility.

How do you light a pilot without a lighter?

Pilot ignition or “Ignite” may be written on a red button or switch near the regulator valve on some new gas water heaters. Using a lighter to light the pilot light of your heater is unnecessary if it has an igniter.


This post on how to relight a gas stove pilot light was written with your attention span in mind, so thank you for reading it. Let us know how it goes if you need any help re-igniting your gas stove’s pilot light again. We recommend reading up on troubleshooting burner and switch issues on a glass-top range as well as the process of installing an in-wall pellet stove through the chimney.