Updated at: 19-07-2022 - By: cnbusinessnews

How do you clean the drip tray on your fridge? People may not be aware, but refrigerant condenses and becomes water when it comes into contact with an evaporator coil in the refrigerator. As a result, the drip tray picks up the mess.

Everyone knows what a fridge is used for. An excellent refrigerator is one of the most important things you can own as a homeowner. It maintains a consistent cold temperature for all of your food and drink. In order to accomplish this, coils and refrigerators within the system are utilized.

Your refrigerator won’t function properly if you don’t have these parts. Aside from keeping your appliance cool, refrigerants are essential.

The drain at the back of the fridge collects the liquids it has caught and empties it into a container. As soon as the fans are cooled down, the condensed refrigerant condenses into a liquid.

Because it is located at the back of your system, it may cause issues now that it is finished. There could be a fatality if it overfills. Afterwards, if you suspect something is amiss, it’s best to go and investigate. Keep reading and we’ll show you how to handle this issue.

How to Find the Drip Pan on Refrigerator

Condensation from the defrost drain in your freezer flows into your refrigerator’s drip pan, where it can be collected and evaporated. Drain line obstructions can occasionally need a trip into the drip pan for cleaning or repair.

How to clean your fridge freezer drip tray (evaporator tray on BEKO Fridge) - YouTube

As long as you know where to look, finding the drip pan is easy and takes only a matter of seconds. Refrigerator drip pans can be found in a variety of places, although they are virtually universally found near the bottom of the refrigerator. There are a number of reasons for this, but gravity plays a major role.

  1. You can remove the kick panel on the lower front of your fridge if it has one. Most kick panels may be removed by hand. Just tilt and pull the panel out to unlock. The drip pan can be accessed from this location in many refrigerators. Others require removing the refrigerator from its wall mount so that you can reach it’s pan from the back, or bottom.
  2. The defrost drain line always drains into the pan, so follow it. If you can’t see the drain pan from the bottom of the unit, examine where the drain line empties beneath the unit and it should empty into the drain pan. There are several versions of refrigerators that have a drain line running along the back of the appliance. The line may be hidden inside the appliance in other models.
  3. Find the wide flat metal or plastic pan by shining a flashlight or other light source under the refrigerator. In most cases, it is supported by a set of brackets that allow it to be slid out of the way. It’s possible that the pan is full of water, therefore be careful when removing the pan.

What to Check When Your Refrigerator Drip Pan is Full

DEFROST

The defrost function is usually the source of the water that collects in the drip pan. It removes the excess ice. A considerable level of frost in your freezer can lead to a higher volume of water in the drip pan if the defrost suddenly begins working.

DOOR GASKET

In addition, a defective door gasket could be to blame for a full drip pan. When warm air comes into contact with cold air, it creates condensation. Because of a defective door seal, a steady stream of warm air might cause the drip pan to fill up with water and the drain tube to become overflowing.

ICE DOOR

Ice chute doors must also be checked for signs of wear and tear. Even if it’s only a little bit stuck, the heated air will cause the freezer to melt. After that, the water will drain regularly, but you’ll still have a lot of extra in your drip pan.

Methods Of Cleaning A Refrigerator’s Drip Tray

How do you clean the drip tray on your fridge? Turning off your refrigerator is the first and most important thing you should do every time. In this method, you may avoid any potential mishaps and ensure that your fridge is safe just in case.

If a handbook is provided, it’s imperative that you read it. All of the information you need to know about your refrigerator is contained in this guide.

There is a lot of reading involved, but it is worth it. Please have it handy in case you ever need some background information to work with. When it comes to dealing with this, they come in handy.

How much water should be in refrigerator drip pan? - Oven Via

What is a drip tray?

Drip trays, which many of you may not be familiar with, are small containers that sit behind the refrigerator’s rear panel and collect condensation from the freezer or inside the appliance itself before dissipating to the atmosphere.

Depending on their location, most refrigerators come in a variety of styles and configurations. A drip tray, on the other hand, is almost always located at the bottom of a refrigerator. So let’s go on and see how to clean the drip tray in the fridge.

Step #1. Gaining access to the back panel

Now that the power has been shut off, it’s time to remove the water supply from the system, which could cause problems later. Take a screwdriver with you and begin removing the back panels after you’ve completed step one.

It may be difficult to get in at first, but once you do, it will be lot easier to open in the future. To get to the kick panel on your refrigerator, you’ll have to open the doors. Then you’ll have to find a way to get it out of the way.

Step #2. Removing and emptying the drip tray

In most cases, removable ones are available on all models except for a few exceptions. Now that the cover has been removed, see if you can remove the tray from the refrigerator. Once you get going, you’ll be able to get rid of it in a jiffy.

Now, remove the water from the tray and discard it. Don’t worry if any are still in the fridge; we’ll get rid of them all. Finally, fill the tray to the brim with water and flush off the contents.

Step #3. Cleaning the drip tray

Mix one part bleach with two parts water to get a bleach solution. Make sure the tray is completely moist with the solution to avoid any buildups.

It should be left in for at least three minutes.

After three minutes, use a sponge to scrub the tray clean. Make sure to work from one side to the other to avoid spreading mold across the drip tray. Once more, rinse the tray thoroughly to eliminate any remaining solution. Bleach can be seen and smelled from the appliance’s tray if it is not flushed with warm water multiple times.

Inspect the area to make certain there aren’t any leftovers. It’s time to dry everything off now that you’ve completed all the stages. Make certain that no drops or smudges remain after cleaning it properly. Mold can accumulate in your trays for a variety of reasons. When it’s dry, could you return it to its original location?

FAQs

How do you clean non removable drip trays?

Cleaning a Drip Pan That Cannot Be Removed A flexible claw grabber is an effective tool for achieving this goal. The claw can be cleaned by inserting a damp wipe. Using the claw grabber, carefully wipe the drip pan to remove the grime, dirt, and mould that has built up over time.

Why is my refrigerator drip pan full?

High humidity might cause excessive water to flow into the drip pan. Door gasket leaks or the door-dispensing ice dispenser can potentially be to blame for this problem. This problem might be exacerbated if the refrigerator or freezer door is opened frequently.

How do I clean the drip pans on my GE refrigerator?

GE Appliances recommends using a turkey baster to inject a solution containing 1 tablespoon of baking soda diluted in 2 cups of hot tap water once you’ve gained access to the drain opening. You’ll hear water dripping into the drain pan as soon as the drain is clear, and you may then replace the panel.

How do you remove calcium deposits from plastic?

Using one tablespoon of bleach per cup of water, make a solution of water and bleach. Spend one or two hours soaking the containers and other things in the solution before removing them. Once the stains have been removed, thoroughly clean the containers by rinsing and drying them.

How do you clean a water dispenser tray?

Pour vinegar into your dispenser tray and let it sit for three to five minutes. That’s all it takes, I’m not even kidding. To remove the gunk, all you need is a brush and a little dish soap. You’re all done now!

How do you clean the drip pans on a Frigidaire refrigerator?

A Frigidaire refrigerator’s drip pan can be accessed from the back.

  1. The refrigerator’s back can be seen by carefully sliding it out of the way with both hands.
  2. The drip pan can be found near the compressor on the back of the fridge.
  3. Dispose of any liquid that has gathered in the pan in the sink.

Why is there a smell coming from the back of my fridge?

The quick explanation is that the bad smells coming from your fridge are caused by bacteria and mould. Moisture-rich environments are ideal breeding grounds for these dangerous microorganisms. Food spills, fridge condensation, and outdoor humidity can all contribute to the problem.

Should fridge drip pan have water in it?

If there is any water within the refrigerator that needs to be drained, the drip pan is there to capture it. Small amounts of water in the drip pan should safely evaporate rather than accumulate.

Do modern refrigerators have drip pans?

Refrigerator drip pans can be found in a variety of places, although they are virtually universally found near the bottom of the refrigerator. The drip pan can be accessed from this location in many refrigerators. Others require removing the refrigerator from its wall mount so that you can reach it’s pan from the back, or bottom.

How much water should be in refrigerator drip pan? - Oven Via

Why is it wet under my refrigerator?

The defrost tube is the most likely culprit if water is gathering at the bottom of your refrigerator. When you defrost your food, the water travels via the defrost tube to the drain pan, where it evaporates. The ice and debris in this tube can cause water to back up and seep back into the fridge if it is not cleaned out regularly.

Conclusion

The drip tray on the refrigerator can be cleaned in this way. It’s not that difficult for a novice, and if you put your mind to it, it’s not that difficult either. However, molds can grow if they aren’t adequately cleansed. Otherwise, the scent from your refrigerator will be revolting.

Also, if you’re not the kind to deal with situations like these, seek the assistance of a specialist.

Regardless, study how to clean refrigerator water dispensers to get a better understanding of how to clean refrigerator parts. I’m done for the day!