Updated at: 07-05-2022 - By: Sienna Lewis

A shed anchoring guide would be helpful, right? In order to protect your yard tools from the elements, outdoor sheds are the ideal storage solution.

Most outdoor sheds are built on concrete slabs or on top of a wooden frame.

To protect your shed investment, you should tie your outdoor shed to the ground.

In places prone to tornadoes, high winds can force an outdoor shed to fall over or much worse. Anchoring outdoor shelters is a worthwhile investment of time.

Concrete piers are an excellent choice for anchoring a shed because they are simple to construct and cost-effective.

What are Shed Tie Downs and Why Do You Need Them?

In order to prevent a shed from being lifted or moved by wind or water, shed tie downs are used.

You can use cables, metal straps, galvanized connections, twist-in anchors, and concrete tie-downs to secure a piece of machinery or equipment. Depending on the shed’s size and material, the minimum type or size of tie down is determined.

114 How To Tie Down Storage Shed With Mobile Home Anchors - YouTube

Storms and flooding have been on the rise across North America during the past few years. In many places, it has wreaked havoc that hasn’t been seen in a long time.

It is necessary to reevaluate and revise local and national building codes and ordinances in light of the new information. Taking precautions is always preferable to making a mistake.

Meet Local Regulations

Recommendations for mitigating future damage are made in response to each new calamity. Local codes are updated to reflect current trends and needs in order to promote adherence.

Local ordinances can be quite beneficial and rational. Different shed sizes and materials have varying minimum requirements.

New zoning permits for sheds under certain square feet have been added in some locations as a cash grab. The fines for noncompliance are sometimes greater than the cost of the permit, thus it is best to comply and secure the structure rather than demolish it.

Boost Stability and Strength

Securing your shed to the ground improves its structural stability and strength. Because they are smaller, sheds constructed of plastic or light steel tend to be more lightweight.

Every time you open the door, cough, or catch a breeze, they squeak and jingle loudly. Strength and stability are added to the construction by running a cable from one end to the other and securing both ends to the ground. With this, you know that your shed is going to be exactly where you set it when the wind picks up again.


Hurricane tie downs are designed to protect your property and the property of others in the event of a severe storm. You face an additional risk if the wind transports electrical power away from your shed.

The safety of others is ensured by anything that prevents a shed from flying through the air. Just as a belt maintains your pants in their proper place, a tie down holds your shed in its proper place.

Protect Against Wind Damage

There are wind charts that display wind ratings for every section of the continent, did you know about it? Wind maps are frequently used by your local government to estimate the level of protection needed for outbuildings such as sheds.

Protecting your shed from wind damage is essential if you want to keep the contents safe. To ensure the safety of yourself and others, you should secure your shed.

Consider wind protection when purchasing or building a shed.

Insurance Reasons

Wind-related property damage expenses are on the rise, and this has an impact on insurance rates as well.

Sheds and outbuildings must be securely secured in many insurance policies. Damage to your property and the general public are covered by this policy. You can save money on insurance if you secure your vehicle properly.

Types of Shed Anchoring Systems

There are a variety of shed anchors to choose from. Check with your local government to see if there are any minimum standards in place.

When building a new shed on concrete piers, the pier plan is set out in accordance with the shed design.

Concrete Expansion Anchors

In order to secure a structure to the existing concrete, concrete expansion anchors are bolts that expand with the concrete. This is a wonderful option for a concrete shed.

Anchor Bolts

Typically, anchor bolts are used in new construction and are put into the concrete before it has had a chance to completely cure. Afterwards, jig it up and down to realign the surrounding concrete. To meet your shed’s specifications, it must be aligned and level.

Foundation Anchor Plates and Straps

Anchor plates and straps are used to anchor a shed to a foundation.. A prefabricated shed can be constructed on a concrete or timber foundation, or it may already be there. Temporary or long-term structures can be held in place with the help of these.

Auger Style Shed Anchors

A wide helix or screw disc is attached to the base of an auger style anchor. Screwing it into the ground can be a challenge.

Secure the shed with a strap or cable attached to the ring top. A solution for old sheds.

It is possible to link the foundation of an outbuilding directly to a similar product that has a bracket welded to the top of it. For new construction, it’s more practical.

By Type of Construction

After building a new shed, you’ll need to think about how to secure it to the ground when you’re through with it. A shed can be easily secured to a solid basis such as a concrete foundation or pilings.

To anchor a shed to the ground on a foundation of slabs, deck blocks, gravel pads, plastic, grid, or wooden posts, you’ll need a different way. One option is to use auger-style anchors.

Alternatively, you can dig a hole in the ground and build a concrete piling at each corner of your shed.

The foundation and materials used to construct the shed have an impact on whether or not it can be retrofitted. Alternatively, concrete pilings or auger style tie down spikes can be used to secure it. Using expansion anchors, bolts, plates, and straps, you can secure it to a concrete platform or pilings.

By Type of Shed

In terms of structure, wood sheds tend to be heavier and more solid. Anchors in the ground can be attached to the rim plate or beam of a structure constructed of joists and beams or of joists only.

If the building is designed correctly, the walls and roof should be safe. Adding hurricane brackets where the walls and roof meet is an option.

Because of their small weight, plastic storage buildings must be firmly anchored to the ground. Even in light wind gusts, screws inserted into plastic will not hold.

Your shed and its contents will be more secure if you attach cable or straps to anchors on the roof.

Compared to wood, metal sheds are likewise more lightweight, but sheet metal screws work better in metal than in plastic. Almost every demand can be addressed with the metal floor, which can be anchored to the ground at the four corners.

If you live in a location with a lot of wind, larger anchors at the corners with straps or wires may be necessary.

Check out my article on how to build a hurricane-resistant shed as well.

How To Anchor A Storage Shed To The Ground - BikeHike

What is the Best Way to Anchor Your Shed to the Ground?

In order to keep your storage unit in place, you need use concrete to anchor it to the ground. Any anchor in direct touch with the ground, whether it’s made of wood or metal, will degrade over time.

If a cable, plate, or bolt is rusted, it can be checked and replaced. Pinning the slab down to the frost line is a straightforward and less expensive option. It may be used for both new construction and retrofitting.

With concrete, your shed will survive a long period as well. It’s a little more expensive, but you’re probably getting a lot more for your money.

Shed On Concrete Slab

  1. Puncture the sill plate with a suitable bit all the way around the shed’s inside. This is the bottom frame that comes into touch with the slab of concrete. Use a bit with the same diameter as the anchor and made for the sill plate material.
  2. Masonry bits can be used to make holes in concrete slabs. Make holes in the sill plate with the masonry bit. The holes should be 2.5 inches deep.
  3. In order to properly secure the anchor, you will first need to secure it with a flat washer. Thread the nut to the top of the threads, but not all the way through.
  4. Using the anchor’s bottom, insert it into the sill plate’s holes. The only component of the anchor without threads is the bottom. With a hammer, drive the anchor into the holes and the concrete slab. Make sure the anchor bolts are hammered down all the way to the bottom of the holes.
  5. Tighten the sill plate retaining bolts using a socket wrench to secure them.

Shed With Wood Frame Platform

  1. Each corner of the shed should have an anchor pointing away from it. Make sure that only the eye bolt head of the anchor is above the earth by twisting anchors inward until they’re completely submerged. To help twist the anchor into the earth, place the handle of a hammer into the eye bolt head. Anchors feature auger-like auger ends that bore into the ground.
  2. The supplied anchor cable should be looped through the eye bolt head of the anchor and secured in place. The cable clamp can be used to secure the cable to the anchor. With a socket wrench, tighten the clamp around the pipe.
  3. Using a cable, thread the cable across the frame beams under the shed nearest the anchor, then bring it back toward the anchor. Tie the loose end of the cable around the eye bolt head of the anchor and tighten the loop. Use a cable clamp to secure the cable to the anchor. Repeat the process on all four corners of the shed.

The Drip Cap

  • Keeping garden tools and equipment out of the weather is a breeze with an outdoor shed.
  • An outdoor shed that isn’t anchored to the ground is a waste of money.
  • This is the bottom frame that comes into touch with the slab of concrete.
  • In order to properly secure the anchor, you will first need to secure it with a flat washer.
  • With a socket wrench, tighten the clamp around the pipe.

How To Anchor A Metal Shed

Metal sheds come in a wide range of sizes and tend to be heavier than plastic huts.

There are concrete piles at each corner of the shed, so you can secure it from the outside.

The shed and roof are secured with a metal strap or a cable that runs up the wall between the roof metal and metal rafters. both made of metal.

Fixed to a concrete piling with a ring or circle bolt on the other side of the wall.

It is also possible to secure a steel shed to the ground using Auger tie-down spikes.

At each of the four corners, screw the auger into the ground.

You can also use this method instead of concrete pilings.

Best Way To Anchor The Shed To The Ground

The best approach to keep your storage safe is to build a shed on concrete.

When in contact with the ground, wood or metal anchors might degrade.

Tests and repairs can be performed on wires, plates, and bolts that are exposed above ground.

As a new and retrofit option, this is a straightforward and cost-effective option.

Concrete anchors for tents are long-lasting and can even be used to extend your stay in a shed.

Because it’s more expensive, you’re getting more bang for your buck.

Tips For Anchoring A Shed To The Ground

Anchoring A Shed To The Ground

Anchoring a North Carolina shed to the ground to safeguard it from severe winds is a good idea if you’ve built or purchased one. You’ll feel more secure with this extra layer of protection.

What do shed anchors do?

Ideally, sheds should be attached to the ground or to a solid foundation. One of the most important reasons for this is that heavy winds can easily displace the base of your shed. An expensive repair bill is possible because of this. While living in an open, windy environment could be a concern, even if you’re used to living in a relatively tranquil area, when a storm comes through, everything changes. In some jurisdictions, shed anchors may also be required. An anchor package, which we can install for you as a storage shed builder in North Carolina, is one of the services we provide with shed purchases.

How to properly anchor a garden shed | Dirtbolt

Installation process

Steel auger type threaded anchors, similar to those used to secure mobile homes, are what we use to anchor our sheds. A strong impact wrench is used to force them into the ground. Afterward, a rope or chain is attached to the anchor and lashed or bolted securely to the shed runners.

In order to make your shed more weather-resistant, you’ll need to attach shed anchors into the ground and a rope or chain around it. An auger-surfaced anchor isn’t offered by every custom storage shed builder. Some simply employ straight stakes with no holding force.

Adding an anchor package to your storage shed may cost a little more, but many of our customers feel it’s worth it and prefer the peace of mind it provides. To ensure that their sheds would be replaced if damaged by a strong storm, many of our customers include them in their renters’ or homeowners’ insurance policies. Adding an auxiliary building to your homeowners insurance policy typically has little effect on your premiums other than an extra few dollars a month.


Your shed is essential if you want to keep goods and resources that you can’t keep at home.

You’ll need the right materials and protection to ensure that it stands up to the test.

Protects items from rain, snow, and other weather conditions. The shed should be secured to the ground as a result of this.

A beginner or an experienced handyman can benefit from this essay on how to anchor a shed.

A Shed’s Anchoring Methods Why Not Use Concrete Or Wood Instead of Both? Everything is as simple as 1, 2, 3, and 4!