Any home that has a gas range has an exceptional feature. Even if the power goes out, your gas stove will keep on cooking, and your gas bill won’t affect your electricity bill. A vast majority of American households have access to natural gas, meaning that millions of households across the country can use gas stoves. In reality, many of them have electric stoves but also have a secret gas line in case the next owners decide to make the switch. New or renovated houses can have gas lines installed if the homeowner so desires.
The process of installing a gas stove is not difficult, but it should be done with caution. If gas lines aren’t sealed properly, your home is at risk of air poisoning and explosions. Correct plumbing procedures. You should have some experience with gas connections and know how to utilize pipe-joint tape. We’ll lay out the whole process for you.
How to Install a Gas Stove Line Connection?
Gather Your Supplies
Always begin any sort of fix by assembling the necessary tools and materials. This guarantees that once you begin the procedure, you will be able to see it through to its conclusion. A few simple gas line tools are all you need to make this repair.
- DuPont Teflon tape for repairing pipe joints
- Flexible gas range connector with corrugated tubing
- Detector for gas leaks
- Bubble level
Purchasing a Gas Range Connector
Pop the top
Shut Off the Gas
Make sure the gas is turned off before touching the gas line. When the handle is positioned perpendicular to the line, the valve can be shut off locally. Make sure the line and the shut-off are closed before you begin removing an old stove or preparing an old line for hookup. In the event that you don’t already have a shut-off installed, it’s simple to add one in series with your current setup.
The gas line should be checked. Assuming the handle is perpendicular to the line, the lid is secure. Avoid opening it. It is open if the handle is parallel to the door. Pull the plug and check neighboring shutoffs to make sure they are all secured. A wall-mounted control with an in-line emergency stop are common configurations. For maximum safety, make sure you lock both of them.
Remove Old Connector
Once the valve is closed, you can disconnect the old connector from the stove. Any future connections won’t require that old connector, so feel free to toss it in the trash or recycle it. You might want to get your wrench and some work gloves ready for this.
The previous plug must have both ends unscrewed. The use of the wrench, or even two separate wrenches, may be necessary to free the threads. As soon as you have unplugged either end, you can pull out the old connector and put it somewhere safe until you decide how to dispose of it.
Start by removing any old tape from the gas shutoff valve or the pipe leading into the house. You may need to use a wire brush and a moist cloth to remove the old Teflon tape from the gas line connection if it doesn’t come off readily.
Place Gas Stove at Maintenance-Distance
Put your new gas stove in a convenient location for servicing. In other words, how far it will be pulled out from the wall in order to access the back panels for servicing purposes. The total length of your gas line after the connector is this long. Otherwise, every time the stove requires servicing, you’d have to unhook the gas line.
Prepare Gas Connection with Pipe-Joint Tape
To prevent the gas from escaping, you can’t just screw the parts together. A specialized tape for use in-between threads is required for this. It is common practice to use this type of tape to seal off pipe connections. Teflon is used, and the most typical hue is yellow. Use tape to cover the connection’s internal threads. Make sure they are wrapped securely around the entire circumference and that the tape is pulled slightly tight while they are being wrapped.
Since the connector is responsible for securing two separate gas connections, pipe-joint tape should be applied to both the male ends of the gas line and the connector.
Install the New Gas Line Connection
Please connect both ends of the new gas range connector. Connect the male and female ends of the gas line together with care. Simply turn the ends in a clockwise direction to thread the connections together. Finally, use your wrench to fully secure the connector ends. Pull it tight till it won’t go any farther. Make that the connections at both ends of the connector are tight.
Open the Gas Valve
You can now turn the gas on by opening the valve. The stove’s gas supply should be controlled automatically. The handle should be aligned with the valve when turning the emergency valve and the valve close to the wall.
Test for Gas Leaks
Check for gas leaks before leaving the stove unattended. Pick up your gas leak detector and, once turned on, calibrate it in accordance with the manual’s instructions. Then, point the instrument’s detector end toward the disconnected ends of the new gas connectors. In the event of a warning tone, make sure the link is encrypted. The installation was successful if the gas leak detector detected no leak.
Position and Level Your Gas Stove
You may now replace your stove. Turn on the stove by plugging it in and then moving it to where you want it to be. It is always a good idea to make sure the feet of your appliances are level before you turn them on. If you have a bubble level, check the stove’s upper and lower borders. Make sure the stove is on a flat surface. If the stove is not level, adjust the feet by twisting them outward or inward.
Turn on the stove’s burners as a last check that everything is in working order with the gas stove.
How Much Does it Cost to Run a Gas Line?
Average Cost of Gas Line Installation
Plumbing a 30-foot line from an already-existing connection typically costs between $640 and $885, or $24 per foot. To complete it, a plumber may need to cut and thread pipe, drill holes in floor joists or other construction, use fittings to connect the pipe ends, and so on.
The price of a gas appliance installation can rise by as much as 50 percent if a new line has to be routed from the meter to the house. Also, in locations where black iron pipe is mandated, the ability to use copper pipes can result in significant cost savings.
DIY Project Prices: An Average Look
Budget-Friendly Average Price of Professional Installation
Standard Price Levels
Overview of Gas Line Installation
The price tag for extending the gas main, please. How much does it typically set you back to get gas hooked up to your home? Both of these issues are important, but they are not the same.
For roughly $715, a plumber may install a gas line in a home that already has a gas stove and water heater. That’s the same as installing a new gas line. The new line can then be extended from the closest existing line or connector.
The price increases to around $1,600 or more if this is the first gas appliance in the house. The line will enter the house either at the meter or through a pipe installed at the time of construction. If there is an interior line, it will be close to the point where the exterior line enters the house from the street or the propane tank. It is possible that the gas cock valve in the line has been closed and plugged.
The cost of installing a gas line under these two conditions is the subject of this page of Costimates.
The first is a low-cost way to get new gas-burning appliances set up in your home, like a gas fireplace or gas log insert. Similar considerations may apply to the installation of a larger gas furnace in a larger home. It’s necessary to install a larger diameter pipe if a home consumes a lot of gas.
Although most homeowners employ a plumber or mechanical contractor to handle the repair, we explore the elements that affect price and provide a list of retail prices for the necessary items. Time and money spent on plumbing per the hour are both factored in.
Along the process, we highlight gas line installation costs from various reputable sites to illustrate the range of possible costs.
Product and Installation Supplies Cost Details
Gas Line Installation Cost Factors
How much does it typically cost to complete a job like this inside? The estimate can be refined with the help of the aforementioned criteria.
- Whether this is your first line or an extra one is crucial to consider. The plumber will locate the nearest gas line if you currently use gas for a dryer, range, or other device. Typically, a new connection is made so that the line can be run to the new appliance without having to cut the old line.
- The length of the gas line has a major impact on the budget, with an average cost of $24 per foot.
- Installation Challenges Even though the length of the gas line is the same, putting a freestanding fireplace in the basement, where the furnace is located, is significantly easier than installing one in an upper bedroom.
- Standardized Line MaterialBlack pipe made of iron is the norm. Corrugated stainless steel tubing (CSST) is preferable in earthquake-prone locations and can be utilized in places where the code allows it. CSST is regarded as a 50-year product yet costs slightly less than black pipe. A black pipe will last forever. Gas can be piped through flexible copper tubing to appliances in various parts of the United States. We advise having a licensed plumber take care of this for you because it is crucial that they adhere to local regulations.
- The price of the necessary permit varies widely between jurisdictions, as this project will necessitate authorization from local authorities.
- Whether or not Setup of the Equipment is Complimentary – In cases where a larger or more modern gas line is needed for a replacement gas furnace, the contractor for the new furnace will also be responsible for making the connection. In other cases, the plumber may simply install the appliance (gas logs, for instance) and hook up the gas supply. Though this “whole package” will be more expensive than simply operating the line, it could end up saving you money if you compare it to the expense of engaging multiple independent service providers.
- Most appliances already have a natural gas valve installed, but they may be converted to run on propane with a simple valve swap (NG). To convert from natural gas to propane (LP), you’ll need to change the gas valve on your stove or clothes dryer, among other appliances.
- Extra time and money are required to replace a gas line once it has been removed.
- Though it’s not customary for homeowners to install their own gas lines, labor accounts for a significant portion of the total price of professional plumbing services. There is, therefore, a financial opportunity. See the “Do It Yourself” section down below for more information, including our recommendation and your chance to weigh in on whether you think it’s a good idea to DIY or not.
- Habitat – Pricing can vary by as much as 40 percent depending on factors such as local cost of living and the availability of contractors in your area.
Retail Gas Line Cost – Pipe and Supplies
Black pipe comes in pre-fabricated, pre-threaded sections. A planned route from the meter or nearest connection to the equipment site must be determined. The next step is to set up the line with readily available pipe lengths such as 10′, 6′, 4′, and 18′.
Pipe thread sealant (pipe dope) or PTFE (yellow) thread tape will be used to join the various pieces together. Find exactly what the plumbing inspector in your area requires by contacting them directly. Some people are picky even if the law allows it.
CSST tubing, if desired and permitted by code, is available in rolls and is joined using brass fittings.
See some example prices for CSST tube, fittings, and supplies, as well as black pipe.
- Black Pipe, Sizes.75″ to 1.25″, $3.00 – $4.00 per Linear Foot.
- CSST Tubing, in rolls ranging in length from 25 feet to 100 feet, may be purchased for $2.25 to $3.00 per linear foot.
- Brass CSST Fittings | $7.00 – $9.00 apiece.
- Teflon Pipe Thread Sealant, 8 oz. Jar, $8.00 – $12.00.
- Prices range from $3.00 to $4.00 per roll of PTFE Tape measuring 200 inches to 300 inches in width, which is more than sufficient for the vast majority of gas line installations.
Permits, Inspection, Related Costs and Installation Time
Permits and Inspection Cost
- $50 – $200 | You’ll need a permit for a new gas line, and the price of that permit will depend on the line’s length and any applicable local fees.
The expenses associated with putting in a gas line are broken down below. Depending on the scale of your project, you may incur several of these, and their costs are in addition to gas line installation fees.
- Removal of a gas line will set you back $6.00 – $8.00 per foot.
- Propane appliance conversion prices range from $40 to $75.
- The average price to have a gas appliance installed is between $45 and $60.
- Cost to Run Gas Line from Street to House (includes trenching, gas line installation and connections, backfilling): $800 – $2,500 for most suburban lots
- To have a gas line installed from the street to the house (including trenching, gas line installation and hookups, and backfilling), the average suburban lot should expect to pay between $800 and $2500.
Other Costs and Installation Time
The average hourly rate for a plumber is between $80 and $130. This typically adds up to between $18 and $22 per linear foot, with the remaining cost of the job coming from the cost of materials.
Depending on the difficulty of the task at hand, plumbers can run gas lines at a rate of 4-8 feet per hour.
- 1-2 hours | 10-20 foot line in an unobstructed space like a basement or garage
- Five to Five Hours | A Ten to Twenty Foot Line Connecting Floors
- Time Required: 4–6 Hours | Line Length: 15–30 Feet Work Environment: Open space or one with few obstructions
- A 15′-30′ line in a more complicated environment, such as running to a different floor or installing in an attic, can take 5-8 hours to install.
DIY or Hire a Pro?
Changing your own gas lines is not something we advise. The cost of having a plumber connect the gas to your new appliance could be reduced if you are familiar with the process.
If you want to avoid having to call a professional, Fixr recommends taking their advice and leaving the installation of a gas line to the pros. An understatement may be “gas is flammable, and if there are loose couplings or the improper sort of pipes used, it could be disastrous.” It’s possible to save the expected $24 per linear foot, or $24.50 according to Homewyse, but we don’t think it’s worth the risk.
Gas vs Electric Range: Which is Better?
Comparing Gas vs Electric Ranges: GE Edition
The next table contrasts a GE slide-in gas range with its electric version for a quick comparison of the two types of goods.
Gas Ranges Overview
The subject of whether electric or gas stoves are more energy efficient is a major point of contention in the gas vs. electric stove discussion.
It’s worth noting that gas ranges are often more expensive initially, with prices ranging from $760 to $1,260 for oven ranges with 5.3 cubic feet of space. Electric ranges of comparable dimensions typically cost between $660 and $700.
However, gas ranges are less expensive over time because natural gas is usually less expensive than electricity. In this case, a gas range may be easier to keep up with and cheaper in the long run, but it will result in higher energy loss when you cook. If we’re talking statistics, an electric range will transfer roughly 74% of its heat to your food, while a gas range will only transfer about 40% of its heat.
The question is whether you place a higher priority on efficiency or savings. In the former case, the electric stove top is the superior option. When thinking about the latter, a gas stove top is the best option.
Let’s take a look at some of the other ways a gas stove might save the day for your family:
Gas Ranges Pros
- Becomes hot very rapidly
- Rapidly cooling burners
- stronger materials used
- Lowered upkeep costs
- Useable even if the power goes out
Gas Ranges Cons
- The difficulty in managing cold temperatures
- More difficult to clean
- Possibly fewer conveniences
- Explosions and gas spills are possible.
Electric Ranges Overview
We’ve covered the basics of gas vs. electric ranges, and how the former is cheaper over time, but what else is there to say?
Installing an electric range or a gas range will cost about the same, at $160. In contrast, if you want to buy a gas range but your house doesn’t already have a gas line, the installation fees might skyrocket, from $360 to $660. As you may have guessed, if you’re attempting to save money on a new range, it may come down to what kind of appliances you already have in your kitchen. Here, an electric stovetop could prove to be the most practical choice.
If you’re on the market for a new electric stove, keep the following in mind.
Electric Ranges Pros
- Heat at a low setting is more manageable.
- simplified maintenance
- Lowered setup costs
- has more potential menu items
Electric Ranges Cons
- Took longer to heat up
- It’s not as sturdy
- Sometimes leads to higher upkeep costs
- If there’s a power failure, it won’t work.
Our Top Picks: Gas Ranges
Now that we’ve covered the key distinctions between conventional and induction ranges, let’s check out some examples from well-known brands. Here are some of our favorite gas ranges to consider if you don’t want to rely on electricity.
Best Overall Gas Range
Give your kitchen an updated design with the convenience of a freestanding range that looks and feels like a built-in. The Frigidaire FFGH3054US 30″ Freestanding Gas Range in Stainless Steel has a front control panel and can be installed in standard 30-inch openings. For starters, it has five adjustable burners that may heat water for pasta quickly or keep sauces at a low simmer without overcooking.
Moreover, this Frigidaire oven cleans itself with a single touch, offering self-clean cycles that last 2, 3, or 4 hours.
Best Value Gas Range
If you want to become a better cook, you don’t have to go out and buy an expensive new appliance. Frigidaire’s 30″ Stainless Steel Freestanding Gas Range (FFGF3054TS) features a powerful 17,000-BTU burner, allowing you to bring dinner to the table in record time.
This gas range has all the features of our top pick (including the slide-in design, one-touch self-clean, continuous grates, storage drawer, and big oven) but costs only a third as much.
Best Luxury Gas Range
KitchenAid is in the batting order for the high-end cooking equipment manufacturers. Even-HeatTM True Convection in the KitchenAid 30″ Stainless Steel Slide In Gas Range (KSGG700ESS) ensures the oven is heated to and maintains the ideal temperature for cooking any dish, from appetizers to desserts.
There’s a Steam Rack on this lovely gas range, so you can add moisture to the oven and get better results cooking. In addition, if you are the reigning “host with the most,” this gas range’s 5.8-cubic-foot capacity will come in handy when you need to cook for a large number of people at once.
Our Top Picks: Electric Ranges
Even if you’re more enamored with electric stoves, we’ve got some suggestions for you, too. Here are some of our favorite options from high to low cost ranges, provided by LG, GE, and KitchenAid (and other criteria).
Best Overall Electric Range
With the greatest oven capacity in its class, the LG 30″ Stainless Steel Slide In Electric Range (LSE4613ST) can accommodate all of your cooking utensils with ease. This highly regarded LG range, which was apparently inspired by professional ranges, relocated the oven’s heating element from the bottom to the back wall, where it provides uniform heat across the oven. This LG electric slide-in range is not only cutting-edge in its functionality but also stylish in its bespoke design, which will complement any kitchen and make cooking a delight.
These dual cooktop components are the most powerful on the market, and they’ll have you ready to eat in record time. Not only do they provide the quickest boil time of any LG range, but they also let you to customize your cooking experience by choosing an element size that is perfectly suited to the pan you want to use.
Best Value Electric Range
If you’re looking for a bargain, GE is always there. With a 5.3-cubic-foot oven capacity and two 6-to-9-inch Power Boil elements that can adjust to fit practically any size cookware, the GE 30″ Freestanding Electric Range (JB645RKSS) provides plenty of room to cook a whole meal at once.
One of the range’s many features is a pull-out storage drawer that’s the full width of the appliance and a self-clean function.
Best Luxury Electric Range
This high-end KitchenAid 30″ Stainless Steel Freestanding Electric Double Oven Range (KFED500ESS) is remarkable because of its numerous useful features. KitchenAid clearly has an advantage over the competition, with features like the EasyConvectTM Conversion System, which removes the guesswork from using a convection oven, and the designated warming zone on the stovetop.
With a total capacity of 6.7 cubic feet, the ovens can handle major meals like chicken nuggets and side dishes like green-bean casseroles with equal ease.
How hard is it to run a gas line for a stove?
Do not attempt to install a gas line as your first DIY project. A gas line can be installed by a professional, but competent DIYers can handle it just as safely. Although there is little room for error, each process is still no harder than installing plumbing or wiring.
Can I connect my gas stove myself?
The process of installing a gas stove or water heater is straightforward and can be completed with only a few simple tools and commonplace materials. You can complete the task without risk to yourself or others if you have the correct tools and equipment and take extra care to observe all safety precautions. Getting hooked up by a pro could cost several hundred dollars.
How much does it cost to put a gas line in for a stove?
A gas line for a stove in a kitchen typically costs $15 to $25 per linear foot to install. The total price tag might be anything from $200 to $1,000 or more due to the usual 30-foot pipe length required to connect to the city’s main gas supply.
Can you use Teflon tape on gas lines?
The yellow hue and “for gas lines and connections only” labeling of Teflon tape, commonly known as gas-rated Teflon tape, indicate that it is intended for use with gas fittings. You can use the tape on butane, propane, or natural gas lines without any problems.
Does a gas stove need a vent?
The vast majority of gas ranges sold in the US do not have to be connected to a vent outside. Any gas stove should have its exhaust pipe run outside the house. Improve your health and safety by venting dangerous gasses from the kitchen with a commercial-grade range hood.
How do you tee off an existing gas line?
Before you can safely disconnect your existing gas line, you’ll need to switch off the gas meter. Once you’ve located the gas line you want to tee off of, you may begin. Once the gas line has been located, it can be severed with a line cutter. Once you’ve done that, plug it into any one of your three outlets.
Can homeowner install gas line Ontario?
To install, relocate, repair, or maintain gas lines on one’s own is permitted in Ontario, although it is not recommended due to the high stakes involved.
How do I get gas connected to my house?
Properties need to be hooked up to the gas grid before they may receive gas deliveries. A Gas Distribution Network (GDN or GT) provider can install a line from the nearest supply to your gas meter if your home is not already wired for natural gas.
Which is better a gas or electric stove?
Professional cooks prefer gas ranges because of the precision they offer when regulating the temperature of the cooking surface; a gas flame can be adjusted quickly from high to low. Furthermore, gas stoves are more long-lasting and economical than their electric counterparts.
The Final Verdict
It should come as no surprise that the winner of the gas range vs. electric range argument is ultimately decided by the individual demands of the user.
Professional cooks prefer gas ranges due to its superior heat regulation, which allows for instantaneous adjustments to the stovetop’s temperature due to the fact that a flame doesn’t require much time to heat up or cool down. Furthermore, gas stoves are more long-lasting and economical than their electric counterparts. There is an initial cost difference between gas and electric models, but gas models often have lower operating expenses over time.
A gas stove is the better investment if you often prepare meals at home for your family.
However, if your kitchen doesn’t have gas stove wiring, an electric range will be less expensive to install. In addition, there is a larger selection of electric ranges across a bigger price range, each of which offers a unique set of cooking possibilities.
Moreover, if you have a busy family and feel like you never have time to clean the kitchen, consider investing in an electric range with a glass surface cooktop.