Updated at: 11-05-2022 - By: Sienna Lewis

Add this to the list of things you don’t think to clean but should. Cleaning a hair dryer filter is now on your to-do list.

It’s pretty uncommon for hair dryers to get clumps of dust on their backs. When your hair dryer filter becomes blocked, it will not function properly.

When I was younger, I felt that hair dryers accumulated dust as a normal part of the aging process. In the end, I decided not to clean the hair dryer because it started to smell bad (because the filter was entirely blocked!).

Having a new (and slightly more costly) hair dryer, I noticed the lint buildup at the back of the filter and discovered (duh!) that the filter is REMOVABLE and really simple to clean.

I bet your hair dryer filter is also removable, full of lint, and very easy to clean. You should check it out right now. Here’s how it’s done:

Why You Should Clean Your Hair Dryer

Weaker Airflow

Because most hair dryers use propeller-driven engines, we know that the dryer filter is positioned behind these engines. The drying ability of a blow dryer can be substantially impacted if the filter is clogged with dirt and hair, as it does not have enough airflow to push out.

How to Clean a Hair Dryer Filter

Louder Noise

Clogged vents can cause a hair dryer to make a lot of noise because airflow is unable to move freely through the dryer’s components. Because of the high-speed airflow caused by a clogged filter, the dryer will make a high-pitched sound if the filter is clogged.

Serious Hair Damage

When the interior body of your hair dryer does not have enough airflow, the hair dryer gets extremely hot. When it comes to blowdrying, that is not a nice thing to have happen. Your hair’s finish and cuticles might be damaged by high heat, resulting in the loss of proteins and nutrients. In addition, an overheated hair drier is more prone to malfunction.

Steps To Clean The Hair Dryer Filter

All electrical appliances are designed to make your life easier. Hot or mild air can be blown on to damp hair to help remove moisture. However, your hairdryer, like all other electronic devices, has to be cleaned from time to time. Keeping your hair dryer clean is vital if it’s malfunctioning. Cleaning the hair dryer filter is easy if you follow these steps in this paragraph:

Step #1. Disassemble and unplug the hairdryer

In order to avoid an electric shock, disconnect the hairdryer from the power outlet. If the dryer is on, all cleaning must be done without contacting the appliance to electricity. After you’ve disconnected the dryer, keep an eye on the airflow. The airflow is usually obstructed. The sealed top is easy to remove because it simply slides off. Make sure you don’t forcefully remove the top in order to avoid breaking it. If you’re unsure about what to do, consult the directions in the book. After that, take a close check at the dryer’s back and front. A wrench can be used to pry the panels apart if they are detachable.

Step #2. Clean the hairdryer filter

A toothpick or tweezers can be used to remove any obvious dust from the hairdryer once it has been dismantled. Using a tweezer can help remove dirt and hair particles from the skin. The drying system’s many components can be cleaned in a variety of ways, some of which are listed below. To begin, run hot water into the sink and remove the cap. Add some hair conditioner or soap to the water to make it sudsy.

Allow the lid to sit for a few minutes before gently brushing the bottom of the lid with a soft-bristled toothbrush to remove any unwanted objects. Before using it, give it time to cool off. Now that you’ve cleaned the hairdryer’s filter, you can either use a hose to clean it or simply wipe it clean. If you’re using a hose nozzle to clean the screens and side holes, do it cautiously. When cleaning your hands, use a little tool like a soft-bristle toothbrush, pointed tweezer, or Q-tips.

After cleaning with lukewarm water, carefully dry the filter. Most dryer filters can dry faster than others. It is important to remember this. Depending on the model being cleaned, let the filter to completely dry. Use a small bristle brush to clean the vents and wire screen. Remove any grease that may have accumulated on the dryer’s base and nozzle with a clean, damp cloth while the dryer’s upper components are drying. A vacuum adaptor can help you clean out the dryer’s extra built-in parts of dirt and debris. A hair dryer and the revlon hair dryer brush may potentially be topics of interest for you.

Step #3. Reinstall the hairdryer

It’s time to replace all of the dryer’s components, including its filter and wire grills, if necessary. Because it has been cleaned, you can now use your dryer. Reinstalling the detachable parts of the dryer while they are wet or still have water on them will damage the dryer’s built-in heating element and other components. Electricity could leak into the wet areas, becoming a source of additional power generation.

Step #4. Start hairdryer again

It takes about 10-15 minutes from start to finish to complete the cleanup; once you’re done, you can put the hairdryer into the power outlet and make sure it functions better than before. Your dryer should now function as it did before you cleaned the filter. Even after a thorough cleaning, if your dryer continues to overheat, it may be time to invest in a new model. The best thing to do if you have a warranty on your hairdryer is to either buy a new one or get a replacement from your local retailer. Hair brush dryer instructions may be helpful.

How to Clean a Hair Dryer Filter

How to Clean Different Types of Hair Dryers

How to Clean Traditional Hair Dryer

Remove the filter by unplugging it from the outlet. Traditional hair dryers often have their engines toward the back of the appliance. Alternatively, you can use a screwdriver to pry open the filter and remove it. It’s easy to see how much lint has accumulated on the vent when you remove the filter.

Clean the filter with water. The water should be rinsed from the interior of the filter to the outside. Because the inside of the filter will be clear of any remaining debris.

It is likely that even after cleaning the filter, the inner screen will still be dusty. To gently remove the dirt, use a toothpick or a little brush. It’s even better if you have a handheld vacuum cleaner.

Put the filter back in the dryer when it’s finished drying. Avoid blow-drying your hair directly. Before using the dryer, set it at high speed and wait a few minutes while it clears the lint from the outlet.

If you want to clean the hair dryer thoroughly, you can open it with a screwdriver and remove any lint or debris from the various parts.

How to Clean Dyson Supersonic Hair Dryer

The procedure differs somewhat if using a Dyson bladeless hair dryer. The filter is at the bottom of the dryer since the motor is located inside the handle. The first step in extending the life of a Dyson Supersonic hair dryer is to remove the filter.

And a little tug will reveal that the filter cage is easily accessible. After that, pour water through the filter cage and allow it to dry.

If you believe the filter is still clogged, use a small wire brush to remove any remaining material before rinsing it.

Finally, if there is any visible debris on the bottom of the handle, use a soft cloth to wipe it clean.

Disassembling a Dyson hair dryer is not something I encourage because the internal structure is more complex than that of a standard blow drier. The hair dryer may be difficult to reassemble if it is dismantled, so be careful.

Besides Cleaning It, What Can I Do to Maintain My Hair Dryer’s Condition?

Your blow dryer’s lifespan can also be affected by how you organize your hair tools. Avoid using your blow dryer in or near a wet area. There is a risk that moisture from the air will get inside and damage the blow dryer’s electronic components.

The dryer should not be placed in direct sunlight. Electronics quality and performance will suffer as a result of the sun’s sweltering heat. In addition, the coating on your hair drier will begin to fade.

If you haven’t used your hair dryer in a while, it’s a good idea to turn it on once a month. For removing the filth and drying out the wetness, use this product in the washing machine. The motor can be protected from deterioration and moisture with this procedure. There is no need to worry about your vehicle’s performance deteriorating.

Why does my hair dryer smell burnt?

Trap of Lint To prevent hair and dust from getting into your dryer, there is a lint trap on the rear of every blow dryer. When that happens, your hair dryer may have a burning odor when used. Cleaning the lint trap is the only way to fix this issue.

Why is my hair dryer making a funny noise?

The rattling noise you’re hearing could be caused by a loose, broken, or clogged impeller (the plastic part inside the dryer where blades draw air in through the vents, push the air past the heating element and shoot it out). Retightening or replacing impellers is an option, but this can be an expensive fix.

Why is my hair dryer sticky?

As they age, soft plastic surfaces can become sticky. Hairdryer handles, vintage pens, and mice’s tails are just a few examples. Soap has no effect on this sticky coating, and it is commonly the cause of waste. Isopropyl (rubbing) alcohol can be used to clean these goods before they are thrown away.

How do you remove hairspray residue?

It’s up to you whether or not you want to use any dish soap at all. Rub alcohol can be used to remove extremely thick hairspray buildup by pouring a tiny amount on the floor, working in small areas at a time, and wiping up the solution as it dissolves. To remove any leftover residue and streaks, use plain water to wipe the entire area after using either approach.

Nanoe EH-NA98-K645 - Panasonic Vietnam

How do you get hairspray buildup off a flat iron?

As an alternative to rubbing alcohol, mix three parts baking soda with one part water to form a paste. A moist, lint-free washcloth is all that’s needed to remove any hairspray residue from the barrel of the iron. It’s best to keep going until the iron is completely clean

How do I get sticky residue off my curling iron?

Wash the handle well with a solution of water and cutting liquid dish soap. Rub alcohol and a clean towel can be used to remove any remaining moisture from the handle once it has dried. If the sticky surface persists, make a thick paste out of baking soda and water, similar to toothpaste’s viscosity.

How do you maintain a hair dryer?

The safety and upkeep of hair dryers After you’ve finished using it, place the hair dryer on a heat-resistant surface to cool. When using a hair dryer, never leave it unattended. When not in use, turn off your hair dryer. Hair dryer vents should not be obstructed.

Why is it important to regularly check the filter in a hair dryer?

All hairdryers have the potential to catch fire if their filters aren’t properly maintained! Do you frequently check the cables of your appliances to see whether they have been damaged or if they need to be replaced?

It’s A Wrap!

Friends, we appreciate your patience as we’ve come to the end of this piece. Consequently, if your hairdryer isn’t working properly, you should clean the dryer filter. Do not worry if you are unable to clean the hair dryer filter. We’ve outlined all the actions you need to do to clean the dryer’s filter above. The entire process of cleaning the filter takes no more than 15 minutes. Please read this article to learn how to clean the dryer’s filter! To learn more about what to look for in a hair dryer, see this page.