Updated at: 15-07-2022 - By: Sienna Lewis

Is the pilot light on your gas stove not working as it should? There are a few simple methods, and these methods vary depending on the situation; we’ll cover all of these as you read this post.

There are still a few gas stoves that employ the old-fashioned standing flame pilot to light the flame and start up the gas.

An ancient stove’s pilot flame may need to be tinkered with from time to time to keep it running smoothly. Overly high pilot lights on gas stoves waste gas. It is possible that the burners will not start, or that the pilot light will go out, if it is too cold outside. You, my friends, need to know much more about this subject. You should learn how to ignite and set up a pilot light before you proceed. Just continue reading!

What’s A Pilot Light?

It is a device that maintains a constant flow of flammable gas. Initiating the burner is the function of this component. How? In order to create heat, gas is emitted from the main burner, which is ignited by the pilot light flame. In addition to warming up the main burner, this heat also heats the air or water inside your appliance, which may subsequently be circulated around your house or business as needed.

How To Adjust Pilot Light On Gas Stove? 3 Different Situations! - Krostrade

Appliances With Pilot Lights

Water heaters and older furnaces and boilers are more likely to have a pilot light. If you have a gas fireplace, you may also notice a pilot light. Find out how to turn on your gas fireplace’s pilot light by clicking this link. Pilot lights are increasingly being replaced by hot surface or spark igniters in recent years.

The gas is ignited by the pilot flame, which provides heat for your residence or place of business. So, if you’re having trouble getting hot water to flow, check the pilot light on your water heater. The pilot light in your furnace or boiler may have gone out, so check it out if you have no heat.

Ways To Adjust Pilot Light On Gas Stove

There is one pilot light for both the stove and oven burners on a gas range, for example. There is a pilot light located on the metal prong that looks like a sprinkler head. Remove the knob with a lighter while a friend holds the oven control rod.

When the thermocouple has warmed up and the pilot is lighted, you must press the rod down for about 20 seconds at a time to keep it going. It’s the identical procedure to ignite pilots on all stove models. If the gas stove pilot temperature is excessively high or low, a screw near the handle can be turned to adjust it.

After the burners and stove have been removed, a screw is usually available. Look for a small air chamber by following the pilot tube to the control handle. Once the pilot flame is dimmed, turn the screw counterclockwise in small clockwise revolutions again. Increasing the wick’s counterclockwise rotation increases the flame’s size. If the device is functioning properly and responds appropriately to changes in conditions, blue flames may appear.

You may have to manually adjust the air intake on some stoves in order to control the air/gas mixture and hence adjust the pilot light. When the air chamber is filled, a control knob is used to adjust the amount of air that enters. Modifying the air intake is as simple as shifting the intake plate after loosening the plate’s locking nut. Using a spinner, progressively close the aperture to reduce the flame’s size. The flame will be more apparent and the aperture will be more extensive if you turn it over.

So how can you change the gas stove’s pilot light to suit your needs in various situations?

#1. Thermocouple failure

When the pilot is frequently modified, the thermocouple may not be able to maintain the gas valve open. The thermocouple can fail if the pilot flame is too far away, the flame is too small or intermittent, or the thermocouple is damaged. The first issue is simple to resolve. When the gas is turned off, you can change the probe by pressing or tugging on it. If the thermocouple is bad, you’ll need to remove it from the burner by unscrewing it and removing it. Make a fresh start by undoing the old installation. How to replace a thermocouple or flame sensor in a furnace may be of interest to you.

#2. Too small flame

When the flame is too small, loosen the pilot screw on the valve control with a screwdriver. If a screw is missing a label, look in the appliance’s owner’s manual to see where it goes. A poor flame can also be caused by a clog in the pilot tube. Pushing compressed air through a barrier while clutching a can upside down is an effective method. The pilot tube’s aperture can be punctured with a needle if required. I want to know why my gas stove’s flame is orange.

#3. Reducing or increasing the rate of airflow

You may have a draft if your gas stove’s pilot light keeps going out. Heating gas controls are frequently located on the floor where they can be easily knocked out by a strong wind. A sweep or a metal screen can be installed at the bottom of the door to keep air out of the entrance. There may be clogged vents or a shortage of oxygen that causes pilot performance to suffer. Reinstalling the pilot may be all that’s needed after cleaning out the vent hole.

Relighting your pilot light – here’s how to do it:

  1. Prepare yourself. The best lighter is a long-wand lighter with a microfiber cloth.
  2. Put an end to it. Before continuing, turn off all of the stove’s burners and check to see if you can smell gas (you might if you’ve been trying to fire your stove for a while).
  3. Discard the grating. Pilot lights can be accessed by removing the burner grates (now would be the perfect time to clean them).
  4. Turn on the stove. Your range’s owner’s manual has detailed instructions on how to open the stove top. A hinged top can be found on several types, which will keep the top in place.
  5. Make your way to the pilot’s port. The pilot light is located in the middle of each of the gas lines that link the burners underneath the stovetop. There should be a small blue flame if everything is operating properly.
  6. Clean around the pilot light. Using a microfiber cloth, wipe away any grease or debris from the pipes or gas pipe hole.
  7. Begin by igniting the pilot light. You can use a lighter to light up each of the holes. There should be a little blue flame that appears.
  8. Put a stop to it. Replace the burner grates by closing the stovetop and reinstalling them.


Can a pilot light flame be adjusted?

The flame can be moved upward or downward using a “Lo-Hi” button on some fireplaces. Others will have a screwdriver-friendly adjustment mechanism. In order to raise the flame, use a counterclockwise motion to turn the screw counterclockwise.

Your gas stove is warming the climate — even when it's turned off | Salon.com

Why is my pilot light flame too high?

So, if the flame on your pilot light is always too high, check to see whether your fireplace has a button that may raise or lower the flame. If you can’t find a button for this, try adjusting a screw on the fireplace. Turning it counterclockwise reduces the fire while turning it clockwise increases it.

Can a pilot light be too high?

A: Pilot light flame height can be controlled. The thermocouple should be contacted by the pilot flame at a certain height. A stronger flame is required if the blue and weak blue flame barely reaches the thermocouple. It’s too powerful if it extends far above the thermocouple.

How do I reduce the flame on my gas stove?

You can manually modify the flames if they are too high or low. Turn on all of the burners on the surface. Make sure that the burner’s knob is set to “Lo” mode. Remove the knob and turn it the other way. When you’re ready to use the valve, insert a flat-blade screwdriver into the shaft. The flame may be adjusted by turning the valve. Reinstall the knob.

Where is the pilot light adjustment screw?

It is located behind the cap screw. To reduce the pilot flame, crank the screw.

Why is my pilot light so loud?

When the pilot light is on, a roaring sound usually indicates that the flame has to be adjusted. A fan or blower is the most common source of a grinding or screaming sound. There are newer gas fireplaces with blowers that are typically much quieter than earlier fan systems.

How do you adjust the pilot on a Honeywell gas valve?

Take a screwdriver and unscrew the screw cap cover on the pilot light adjustment screw. The pilot light can be lowered by turning the screw clockwise with a screwdriver. The pilot light’s height can be adjusted by turning the screw counterclockwise.

What should a pilot light flame look like?

A Gas Furnace’s Pilot Light Must Be Inspected At the tip, there should be a small quantity of yellow to give the flame its dazzling blue hue. In comparison to an electric flame, a propane flame is more bluish-green in color, although it has a yellow tint towards the tip. The flame should be powerful enough to cover the thermocouple tip by about half an inch.

Why does my pilot light burn yellow?

A clogged air intake valve for the pilot light is the most typical cause of a pilot light becoming yellow. Small amounts of dust or other debris could cause a yellow tint to appear only at the flame’s tip. All of the dirt in the flame will turn it yellow.

How Big Should the flame be on a pilot light?

Ideally, the pilot flame should be blue, with a yellow tip, and strong enough to cover roughly half an inch of the thermocouple tip. The flame will turn blue, but it will be noisy and may even lift the thermocouple, resulting in faulty furnace operation if it is set up incorrectly.

Why is my pilot light orange?

Due to a shortage of oxygen, your pilot light’s flame may seem orange or yellow. Detection is made possible by a thermocouple, which senses a decrease in the temperature of the flame.

How do you adjust the air mix on a gas fireplace?

To raise the gas-to-air ratio, use a flat-bladed screwdriver inserted into the setscrew on the valve’s right side and turning counterclockwise. Setscrews can be turned counter-clockwise to minimize the amount of gas and air that mix. Your Heat-n-Glo fireplace’s flame color and intensity can be improved by asking a friend to describe it to you.

Why is the flame on my stove so high?

On One Side, the Flame Is More Developed. You may have an incorrectly positioned burner cap if your burner has a dramatically high side and a weaker side. Simply switch off the burner and allow it to cool down. Finally, grab the burner cap and re-align it.

How do you adjust a gas stove regulator?

Regulator with a modest amount of gas flowing: Adjust the gas pressure regulator by turning the adjustment screw clockwise. Lower the outlet pressure by turning the adjustment screw counter-clockwise.

What is a gas ring reducer?

Allows small pans and appliances such as stovetop espresso machines to be safely and quickly placed on any gas ring. Allows for more stable use of the reducer. Size that is convenient to keep and transport. Securingly rests on stovetops

What does the pilot screw adjust?

When adjusting the amount of air flow through the pilot circuit with an air screw, you can make it richer (more air) or leaner (more air). The amount of fuel (or air/fuel mixture) being delivered from the pilot circuit can be adjusted via a fuel screw. As a result, the inside is slim while the outside is rich (more fuel).

How do you adjust the pilot light on a gas valve?

A Guide to Gas Furnace Pilot Light Flame Adjustment Disconnect your furnace’s access plate by unscrewing its screws, which are located on its front. Take a look at the flame and see what happens. The flame should get bigger if you turn the screw counter-clockwise.

What causes a weak pilot light?

Low gas pressure or a clogged aperture are the most likely causes of a poor pilot flame. Overly dim or underpowered flame. A lack of gas supply. Thermocouple that is defective or unreliable.

Cooking Up Indoor Air Pollution: Emissions from Natural Gas Stoves | Healthy Indoors

It’s A Wrap!

If the flame is feeble, there is a blockage in the pilot tube. In this case, no amount of screw-tightening will help. Depending on the pilot’s position, compressed air can be blown into the feature to clear an obstruction. To remove a fat clog, simply push a pin into the opening.

A faulty thermocouple is the likely cause of flickering or sputtering flames. When the pilot light is on, an electrical signal is transmitted to the gas valve telling it to stay open. After moving the thermocouple closer to the flame, if you see a change in temperature, you’ve done a good job. If the procedures for adjusting the pilot light on a gas stove don’t work, you may have no choice except to buy a new one.

Related articles on why won’t my gas stove light and how to cook on a gas stove may be of interest to you.